lkml.org 
[lkml]   [2017]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Device address specific mapping of arm,mmu-500
From
Date
Hi Ray,

On 05/06/17 19:03, Ray Jui wrote:
> Hi Will/Robin,
>
> Just want to check with you on this again. Do you have a very rough
> timeline on when the excessive locking in the IOMMU driver may be fixed
> (so we can restore expected up to 95% performance)?

I've currently got some experimental patches pushed out here:

git://linux-arm.org/linux-rm iommu/pgtable

So far, there's still one silly bug (which doesn't affect DMA ops usage)
and an awkward race for non-coherent table walks which will need
resolving before I have anything to post properly, which I hope will be
within the next couple of weeks. In the meantime, though, it already
seems to work well enough in practice, so any feedback is welcome!

Robin.

>
> Thanks,
>
> Ray
>
>
> On 5/31/17 10:32 AM, Ray Jui wrote:
>> Hi Will,
>>
>> On 5/31/17 5:44 AM, Will Deacon wrote:
>>> On Tue, May 30, 2017 at 11:13:36PM -0700, Ray Jui wrote:
>>>> I did a little more digging myself and I think I now understand what you
>>>> meant by identity mapping, i.e., configuring the MMU-500 with 1:1 mapping
>>>> between the DMA address and the IOVA address.
>>>>
>>>> I think that should work. In the end, due to this MSI write parsing issue in
>>>> our PCIe controller, the reason to use IOMMU is to allow the cache
>>>> attributes (AxCACHE) of the MSI writes towards GICv3 ITS to be modified by
>>>> the IOMMU to be device type, while leaving the rest of inbound reads/writes
>>>> from/to DDR with more optimized cache attributes setting, to allow I/O
>>>> coherency to be still enabled for the PCIe controller. In fact, the PCIe
>>>> controller itself is fully capable of DMA to/from the full address space of
>>>> our SoC including both DDR and any device memory.
>>>>
>>>> The 1:1 mapping will still pose some translation overhead like you
>>>> suggested; however, the overhead of allocating page tables and locking will
>>>> be gone. This sounds like the best possible option I have currently.
>>>
>>> It might end up being pretty invasive to work around a hardware bug, so
>>> we'll have to see what it looks like. Ideally, we could just use the SMMU
>>> for everything as-is and work on clawing back the lost performance (it
>>> should be possible to get ~95% of the perf if we sort out the locking, which
>>> we *are* working on).
>>>
>>
>> If 95% of performance can be achieved by fixing the locking in the
>> driver, then that's great news.
>>
>> If you have anything that you want me to help test, feel free to send it
>> out. I will be more than happy to help testing it and let you know about
>> the performance numbers, :)
>>
>>>> May I ask, how do I start to try to get this identity mapping to work as an
>>>> experiment and proof of concept? Any pointer or advise is highly appreciated
>>>> as you can see I'm not very experienced with this. I found Will recently
>>>> added the IOMMU_DOMAIN_IDENTITY support to the arm-smmu driver. But I
>>>> suppose that is to bypass the SMMU completely, instead of still going
>>>> through the MMU with 1:1 translation. Is my understanding correct?
>>>
>>> Yes, I don't think IOMMU_DOMAIN_IDENTITY is what you need because you
>>> actally need per-page control of memory attributes.
>>>
>>> Robin might have a better idea, but I think you'll have to hack dma-iommu.c
>>> so that you can have a version of the DMA ops that:
>>>
>>> * Initialises the identity map (I guess as normal WB cacheable?)
>>> * Reserves and maps the MSI region appropriately
>>> * Just returns the physical address for the dma address for map requests
>>> (return error for the MSI region)
>>> * Does nothing for unmap requests
>>>
>>> But my strong preference would be to fix the locking overhead from the
>>> SMMU so that the perf hit is acceptable.
>>
>> Yes, I agree, we want to be able to use the SMMU the intended way. Do
>> you have a timeline on when the locking issue may be fixed (or
>> improved)? Depending on the timeline, on our side, we may still need to
>> go for identity mapping as a temporary solution until the fix.
>>
>>>
>>> Will
>>>
>>
>> Thanks,
>>
>> Ray
>>

\
 
 \ /
  Last update: 2017-06-12 00:43    [W:0.066 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site