lkml.org 
[lkml]   [2017]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: dts: AM43XX: Remove min and max voltage values for dcdc3
* Keerthy <j-keerthy@ti.com> [170602 02:27]:
> dcdc3 supplies to DDR on AM43x series. When we set both
> min and max values to the same value. The regulator framework
> sets that particular voltage. This is bad as we are changing
> the ddr voltage when executing from ddr. Hence remove the min and
> max values. The ddr supply voltage shall be set from bootloader
> when not executing from ddr and not while executing from kernel.
>
> The previous discussion can be found here:
>
> http://www.spinics.net/lists/devicetree/msg56399.html
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>

Applying into omap-for-v4.13/dt thanks.

Tony

\
 
 \ /
  Last update: 2017-06-12 00:40    [W:0.075 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site