lkml.org 
[lkml]   [2017]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 04/28] clocksource: Add Owl timer
Date
The Actions Semi S500 SoC provides four timers, 2Hz0/1 and 32-bit TIMER0/1.

Use TIMER0 as clocksource and TIMER1 as clockevents.

Based on LeMaker linux-actions tree.

An S500 datasheet can be found on the LeMaker Guitar pages:
http://www.lemaker.org/product-guitar-download-29.html

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v3 -> v4:
* Dropped DT-dependent node iteration (Daniel)
* Introduced owl_timer_set_enabled() (Daniel)
* Fixed one timer reset

v2 -> v3:
* Cleared interrupt pending flag for Timer1
* Adopted named interrupts for Timer1
* Extended commit message (Daniel)
* Adopted BIT() macros (Daniel)
* Adopted PTR_ERR() (Daniel)
* Adopted request_irq() (Daniel)
* Factored timer reset out (Daniel)
* Adopted CLOCK_EVT_FEAT_DYNIRQ (Daniel)
* Adopted clk input for rate (Daniel)
* Prepared for S900, adopting S500 DT compatible

v2: new

drivers/clocksource/Kconfig | 7 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/owl-timer.c | 171 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 179 insertions(+)
create mode 100644 drivers/clocksource/owl-timer.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 4ba230d8e679..da3f1d926c6b 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -102,6 +102,13 @@ config ORION_TIMER
help
Enables the support for the Orion timer driver

+config OWL_TIMER
+ bool "Owl timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ select CLKSRC_MMIO
+ help
+ Enables the support for the Actions Semi Owl timer driver.
+
config SUN4I_TIMER
bool "Sun4i timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index ec559212edf6..90309d4a719e 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
+obj-$(CONFIG_OWL_TIMER) += owl-timer.o

obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
diff --git a/drivers/clocksource/owl-timer.c b/drivers/clocksource/owl-timer.c
new file mode 100644
index 000000000000..4609363a79a6
--- /dev/null
+++ b/drivers/clocksource/owl-timer.c
@@ -0,0 +1,171 @@
+/*
+ * Actions Semi Owl timer
+ *
+ * Copyright 2012 Actions Semi Inc.
+ * Author: Actions Semi, Inc.
+ *
+ * Copyright (c) 2017 SUSE Linux GmbH
+ * Author: Andreas Färber
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define OWL_Tx_CTL 0x0
+#define OWL_Tx_CMP 0x4
+#define OWL_Tx_VAL 0x8
+
+#define OWL_Tx_CTL_PD BIT(0)
+#define OWL_Tx_CTL_INTEN BIT(1)
+#define OWL_Tx_CTL_EN BIT(2)
+
+static void __iomem *owl_timer_base;
+static void __iomem *owl_clksrc_base;
+static void __iomem *owl_clkevt_base;
+
+static inline void owl_timer_reset(void __iomem *base)
+{
+ writel(0, base + OWL_Tx_CTL);
+ writel(0, base + OWL_Tx_VAL);
+ writel(0, base + OWL_Tx_CMP);
+}
+
+static inline void owl_timer_set_enabled(void __iomem *base, bool enabled)
+{
+ u32 ctl = readl(base + OWL_Tx_CTL);
+
+ /* PD bit is cleared when set */
+ ctl &= ~OWL_Tx_CTL_PD;
+
+ if (enabled)
+ ctl |= OWL_Tx_CTL_EN;
+ else
+ ctl &= ~OWL_Tx_CTL_EN;
+
+ writel(ctl, base + OWL_Tx_CTL);
+}
+
+static u64 notrace owl_timer_sched_read(void)
+{
+ return (u64)readl(owl_clksrc_base + OWL_Tx_VAL);
+}
+
+static int owl_timer_set_state_shutdown(struct clock_event_device *evt)
+{
+ owl_timer_set_enabled(owl_clkevt_base, false);
+
+ return 0;
+}
+
+static int owl_timer_set_state_oneshot(struct clock_event_device *evt)
+{
+ owl_timer_reset(owl_clkevt_base);
+
+ return 0;
+}
+
+static int owl_timer_tick_resume(struct clock_event_device *evt)
+{
+ return 0;
+}
+
+static int owl_timer_set_next_event(unsigned long evt,
+ struct clock_event_device *ev)
+{
+ void __iomem *base = owl_clkevt_base;
+
+ owl_timer_set_enabled(base, false);
+ writel(OWL_Tx_CTL_INTEN, base + OWL_Tx_CTL);
+ writel(0, base + OWL_Tx_VAL);
+ writel(evt, base + OWL_Tx_CMP);
+ owl_timer_set_enabled(base, true);
+
+ return 0;
+}
+
+static struct clock_event_device owl_clockevent = {
+ .name = "owl_tick",
+ .rating = 200,
+ .features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_DYNIRQ,
+ .set_state_shutdown = owl_timer_set_state_shutdown,
+ .set_state_oneshot = owl_timer_set_state_oneshot,
+ .tick_resume = owl_timer_tick_resume,
+ .set_next_event = owl_timer_set_next_event,
+};
+
+static irqreturn_t owl_timer1_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+ writel(OWL_Tx_CTL_PD, owl_clkevt_base + OWL_Tx_CTL);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init owl_timer_init(struct device_node *node)
+{
+ struct clk *clk;
+ unsigned long rate;
+ int timer1_irq, ret;
+
+ owl_timer_base = of_io_request_and_map(node, 0, "owl-timer");
+ if (IS_ERR(owl_timer_base)) {
+ pr_err("Can't map timer registers");
+ return PTR_ERR(owl_timer_base);
+ }
+
+ owl_clksrc_base = owl_timer_base + 0x08;
+ owl_clkevt_base = owl_timer_base + 0x14;
+
+ timer1_irq = of_irq_get_byname(node, "timer1");
+ if (timer1_irq <= 0) {
+ pr_err("Can't parse timer1 IRQ");
+ return -EINVAL;
+ }
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ rate = clk_get_rate(clk);
+
+ owl_timer_reset(owl_clksrc_base);
+ owl_timer_set_enabled(owl_clksrc_base, true);
+
+ sched_clock_register(owl_timer_sched_read, 32, rate);
+ clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
+ rate, 200, 32, clocksource_mmio_readl_up);
+
+ owl_timer_reset(owl_clkevt_base);
+
+ ret = request_irq(timer1_irq, owl_timer1_interrupt, IRQF_TIMER,
+ "owl-timer", &owl_clockevent);
+ if (ret) {
+ pr_err("failed to request irq %d\n", timer1_irq);
+ return ret;
+ }
+
+ owl_clockevent.cpumask = cpumask_of(0);
+ owl_clockevent.irq = timer1_irq;
+
+ clockevents_config_and_register(&owl_clockevent, rate,
+ 0xf, 0xffffffff);
+
+ return 0;
+}
+CLOCKSOURCE_OF_DECLARE(owl_s500, "actions,s500-timer", owl_timer_init);
--
2.12.3
\
 
 \ /
  Last update: 2017-06-12 00:37    [W:0.460 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site