lkml.org 
[lkml]   [2017]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 5/6] g_NCR5380: Re-work PDMA loops
Date
From: Ondrej Zary <linux@rainbow-software.org>

The polling loops in pread() and pwrite() can easily become infinite
loops and hang the machine.

Merge the IRQ check into host buffer wait loop and add polling limit.

Also place a limit on polling for 53C80 registers accessibility.

[Use NCR5380_poll_politely2() for register polling. Rely on polling for
gated IRQ rather than polling for phase error, like the algorithm in the
53c400 datasheet. Move DTC436 workarounds into a separate patch.
Factor-out common code as wait_for_53c80_access(). Rework the residual
correction. -- F.T.]

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
drivers/scsi/g_NCR5380.c | 173 +++++++++++++++++++++++++----------------------
1 file changed, 92 insertions(+), 81 deletions(-)

diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 33e1a480c903..137ec58c43ac 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -480,6 +480,28 @@ static void generic_NCR5380_release_resources(struct Scsi_Host *instance)
release_mem_region(base, region_size);
}

+/* wait_for_53c80_access - wait for 53C80 registers to become accessible
+ * @hostdata: scsi host private data
+ *
+ * The registers within the 53C80 logic block are inaccessible until
+ * bit 7 in the 53C400 control status register gets asserted.
+ */
+
+static void wait_for_53c80_access(struct NCR5380_hostdata *hostdata)
+{
+ int count = 10000;
+
+ do {
+ if (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
+ return;
+ } while (--count > 0);
+
+ scmd_printk(KERN_ERR, hostdata->connected,
+ "53c80 registers not accessible, device will be reset\n");
+ NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+}
+
/**
* generic_NCR5380_precv - pseudo DMA receive
* @hostdata: scsi host private data
@@ -492,18 +514,23 @@ static void generic_NCR5380_release_resources(struct Scsi_Host *instance)
static inline int generic_NCR5380_precv(struct NCR5380_hostdata *hostdata,
unsigned char *dst, int len)
{
- int blocks = len / 128;
+ int residual;
int start = 0;

NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
- NCR5380_write(hostdata->c400_blk_cnt, blocks);
- while (1) {
- if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
+ NCR5380_write(hostdata->c400_blk_cnt, len / 128);
+
+ do {
+ if (NCR5380_poll_politely2(hostdata, hostdata->c400_ctl_status,
+ CSR_HOST_BUF_NOT_RDY, 0,
+ hostdata->c400_ctl_status,
+ CSR_GATED_53C80_IRQ,
+ CSR_GATED_53C80_IRQ, HZ / 64) < 0)
+ break;
+
+ if (NCR5380_read(hostdata->c400_ctl_status) &
+ CSR_HOST_BUF_NOT_RDY)
break;
- if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)
- goto out_wait;
- while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
- ; /* FIXME - no timeout */

if (hostdata->io_port && hostdata->io_width == 2)
insw(hostdata->io_port + hostdata->c400_host_buf,
@@ -514,44 +541,26 @@ static inline int generic_NCR5380_precv(struct NCR5380_hostdata *hostdata,
else
memcpy_fromio(dst + start,
hostdata->io + NCR53C400_host_buffer, 128);
-
start += 128;
- blocks--;
- }
-
- if (blocks) {
- while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
- ; /* FIXME - no timeout */
+ } while (start < len);

- if (hostdata->io_port && hostdata->io_width == 2)
- insw(hostdata->io_port + hostdata->c400_host_buf,
- dst + start, 64);
- else if (hostdata->io_port)
- insb(hostdata->io_port + hostdata->c400_host_buf,
- dst + start, 128);
- else
- memcpy_fromio(dst + start,
- hostdata->io + NCR53C400_host_buffer, 128);
+ residual = len - start;

- start += 128;
- blocks--;
+ if (residual != 0) {
+ /* 53c80 interrupt or transfer timeout. Reset 53c400 logic. */
+ NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
}
+ wait_for_53c80_access(hostdata);

- if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
- printk("53C400r: no 53C80 gated irq after transfer");
-
-out_wait:
- hostdata->pdma_residual = len - start;
-
- /* wait for 53C80 registers to be available */
- while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG))
- ;
-
- if (NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
- BASR_END_DMA_TRANSFER, BASR_END_DMA_TRANSFER,
- HZ / 64) < 0)
+ if (residual == 0 && NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
+ BASR_END_DMA_TRANSFER,
+ BASR_END_DMA_TRANSFER,
+ HZ / 64) < 0)
scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout (%d)\n",
- __func__, hostdata->pdma_residual);
+ __func__, residual);
+
+ hostdata->pdma_residual = residual;

return 0;
}
@@ -568,36 +577,33 @@ static inline int generic_NCR5380_precv(struct NCR5380_hostdata *hostdata,
static inline int generic_NCR5380_psend(struct NCR5380_hostdata *hostdata,
unsigned char *src, int len)
{
- int blocks = len / 128;
+ int residual;
int start = 0;

NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
- NCR5380_write(hostdata->c400_blk_cnt, blocks);
- while (1) {
- if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)
- goto out_wait;
-
- if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
+ NCR5380_write(hostdata->c400_blk_cnt, len / 128);
+
+ do {
+ if (NCR5380_poll_politely2(hostdata, hostdata->c400_ctl_status,
+ CSR_HOST_BUF_NOT_RDY, 0,
+ hostdata->c400_ctl_status,
+ CSR_GATED_53C80_IRQ,
+ CSR_GATED_53C80_IRQ, HZ / 64) < 0)
break;
- while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
- ; // FIXME - timeout

- if (hostdata->io_port && hostdata->io_width == 2)
- outsw(hostdata->io_port + hostdata->c400_host_buf,
- src + start, 64);
- else if (hostdata->io_port)
- outsb(hostdata->io_port + hostdata->c400_host_buf,
- src + start, 128);
- else
- memcpy_toio(hostdata->io + NCR53C400_host_buffer,
- src + start, 128);
+ if (NCR5380_read(hostdata->c400_ctl_status) &
+ CSR_HOST_BUF_NOT_RDY) {
+ /* The chip has done a 128 B buffer swap but the first
+ * buffer still has not reached the SCSI bus.
+ */
+ if (start > 0)
+ start -= 128;
+ break;
+ }

- start += 128;
- blocks--;
- }
- if (blocks) {
- while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
- ; // FIXME - no timeout
+ if (NCR5380_read(hostdata->c400_ctl_status) &
+ CSR_GATED_53C80_IRQ)
+ break;

if (hostdata->io_port && hostdata->io_width == 2)
outsw(hostdata->io_port + hostdata->c400_host_buf,
@@ -608,28 +614,33 @@ static inline int generic_NCR5380_psend(struct NCR5380_hostdata *hostdata,
else
memcpy_toio(hostdata->io + NCR53C400_host_buffer,
src + start, 128);
-
start += 128;
- blocks--;
- }
+ } while (start < len);

-out_wait:
- hostdata->pdma_residual = len - start;
+ residual = len - start;

- /* wait for 53C80 registers to be available */
- while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) {
- udelay(4); /* DTC436 chip hangs without this */
- /* FIXME - no timeout */
+ if (residual != 0) {
+ /* 53c80 interrupt or transfer timeout. Reset 53c400 logic. */
+ NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+ }
+ wait_for_53c80_access(hostdata);
+
+ if (residual == 0) {
+ if (NCR5380_poll_politely(hostdata, TARGET_COMMAND_REG,
+ TCR_LAST_BYTE_SENT, TCR_LAST_BYTE_SENT,
+ HZ / 64) < 0)
+ scmd_printk(KERN_ERR, hostdata->connected,
+ "%s: Last Byte Sent timeout\n", __func__);
+
+ if (NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
+ BASR_END_DMA_TRANSFER, BASR_END_DMA_TRANSFER,
+ HZ / 64) < 0)
+ scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout (%d)\n",
+ __func__, residual);
}

- while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
- ; // TIMEOUT
-
- if (NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
- BASR_END_DMA_TRANSFER, BASR_END_DMA_TRANSFER,
- HZ / 64) < 0)
- scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout (%d)\n",
- __func__, hostdata->pdma_residual);
+ hostdata->pdma_residual = residual;

return 0;
}
--
2.13.0
\
 
 \ /
  Last update: 2017-07-01 04:42    [W:0.066 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site