lkml.org 
[lkml]   [2017]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] iio: Aspeed ADC - Handle return value of clk_prepare_enable
On Mon, 29 May 2017 13:12:12 +0530
Arvind Yadav <arvind.yadav.cs@gmail.com> wrote:

> clk_prepare_enable() can fail here and we must check its return value.
>
> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Please make sure to cc the driver author. This is a fairly new
driver, so chances are Rick will still be answering this email
address.

Patch looks fine to me, but I would like to give Rick the opportunity
to respond.

Jonathan
> ---
> drivers/iio/adc/aspeed_adc.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
> index 62670cb..e0ea411 100644
> --- a/drivers/iio/adc/aspeed_adc.c
> +++ b/drivers/iio/adc/aspeed_adc.c
> @@ -212,7 +212,10 @@ static int aspeed_adc_probe(struct platform_device *pdev)
> }
>
> /* Start all channels in normal mode. */
> - clk_prepare_enable(data->clk_scaler->clk);
> + ret = clk_prepare_enable(data->clk_scaler->clk);
> + if (ret)
> + goto clk_enable_error;
> +
> adc_engine_control_reg_val = GENMASK(31, 16) |
> ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE;
> writel(adc_engine_control_reg_val,
> @@ -236,6 +239,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
> writel(ASPEED_OPERATION_MODE_POWER_DOWN,
> data->base + ASPEED_REG_ENGINE_CONTROL);
> clk_disable_unprepare(data->clk_scaler->clk);
> +clk_enable_error:
> clk_hw_unregister_divider(data->clk_scaler);
>
> scaler_error:

\
 
 \ /
  Last update: 2017-06-05 00:16    [W:0.049 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site