lkml.org 
[lkml]   [2017]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] ARM: sun8i: a83t: Add device node for R_PIO
Date
The A83T has 1 pingroup with 13 pins belonging to the R_PIO
or special pin controller.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 49aeb56970ba..bf63e3b77572 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -44,6 +44,8 @@

#include <dt-bindings/interrupt-controller/arm-gic.h>

+#include <dt-bindings/clock/sun8i-r-ccu.h>
+
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
@@ -280,5 +282,18 @@
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ r_pio: pinctrl@1f02c00 {
+ compatible = "allwinner,sun8i-a83t-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+ <&osc16Md512>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
};
};
--
2.11.0
\
 
 \ /
  Last update: 2017-06-05 00:17    [W:2.107 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site