lkml.org 
[lkml]   [2017]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] crypto: caam - properly set IV after {en,de}crypt
Date
On 6/28/2017 4:42 PM, Horia Geantă wrote:
> On 6/28/2017 4:27 PM, David Gstir wrote:
>> Certain cipher modes like CTS expect the IV (req->info) of
>> ablkcipher_request (or equivalently req->iv of skcipher_request) to
>> contain the last ciphertext block when the {en,de}crypt operation is done.
>> This is currently not the case for the CAAM driver which in turn breaks
>> e.g. cts(cbc(aes)) when the CAAM driver is enabled.
>>
>> This patch fixes the CAAM driver to properly set the IV after the
>> {en,de}crypt operation of ablkcipher finishes.
>>
>> This issue was revealed by the changes in the SW CTS mode in commit
>> 0605c41cc53ca ("crypto: cts - Convert to skcipher")
>>
>> Cc: <stable@vger.kernel.org> # 4.8+
>> Signed-off-by: David Gstir <david@sigma-star.at>
> Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
>
Btw, instead of updating the IV in SW, CAAM engine could be programmed
to do it - by saving the Context Register of the AES accelerator.

Unfortunately this would require changes in quite a few places: shared
descriptor, HW S/G generation logic, IV dma (un)mapping and maybe others.

So it's better to have this fix now (which, considering size, is
appropriate for -stable) and later, if needed, offload IV updating in HW.

Regards,
Horia

\
 
 \ /
  Last update: 2017-06-29 12:19    [W:0.086 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site