lkml.org 
[lkml]   [2017]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] drivers/watchdog: ASPEED reference dev tree properties for config
On Wed, Jun 28, 2017 at 10:55:08AM -0500, Christopher Bostic wrote:
>
>
> On 6/28/17 10:08 AM, Guenter Roeck wrote:
> >On Wed, Jun 28, 2017 at 09:59:22AM -0500, Christopher Bostic wrote:
> >>
> >>On 6/28/17 9:54 AM, Guenter Roeck wrote:
> >>>On Wed, Jun 28, 2017 at 09:29:50AM -0500, Christopher Bostic wrote:
> >>>>On 6/28/17 6:31 AM, Guenter Roeck wrote:
> >>>>>On 06/27/2017 02:17 PM, Christopher Bostic wrote:
> >>>>>>Reference the system device tree when configuring the watchdog
> >>>>>>engines. Set external signal mode on timeout if specified.
> >>>>>>Set system reset on timeout if specified.
> >>>>>>
> >>>>>>Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
> >>>>>>---
> >>>>>>v2 - Change of_get_property() to of_property_read_bool()
> >>>>>> - Remove redundant check for NULL struct device_node pointer
> >>>>>> - Optional property names now start with prefix 'aspeed,'
> >>>>>>---
> >>>>>> drivers/watchdog/aspeed_wdt.c | 13 +++++++++++--
> >>>>>> 1 file changed, 11 insertions(+), 2 deletions(-)
> >>>>>>
> >>>>>>diff --git a/drivers/watchdog/aspeed_wdt.c
> >>>>>>b/drivers/watchdog/aspeed_wdt.c
> >>>>>>index 1c65258..71ce5f5 100644
> >>>>>>--- a/drivers/watchdog/aspeed_wdt.c
> >>>>>>+++ b/drivers/watchdog/aspeed_wdt.c
> >>>>>>@@ -140,6 +140,7 @@ static int aspeed_wdt_probe(struct platform_device
> >>>>>>*pdev)
> >>>>>> {
> >>>>>> struct aspeed_wdt *wdt;
> >>>>>> struct resource *res;
> >>>>>>+ struct device_node *np;
> >>>>>> int ret;
> >>>>>> wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> >>>>>>@@ -170,8 +171,16 @@ static int aspeed_wdt_probe(struct platform_device
> >>>>>>*pdev)
> >>>>>> * the SOC and not the full chip
> >>>>>> */
> >>>>>> wdt->ctrl = WDT_CTRL_RESET_MODE_SOC |
> >>>>>>- WDT_CTRL_1MHZ_CLK |
> >>>>>>- WDT_CTRL_RESET_SYSTEM;
> >>>>>>+ WDT_CTRL_1MHZ_CLK;
> >>>>>>+
> >>>>>>+ np = pdev->dev.of_node;
> >>>>>>+ if (of_property_read_bool(np, "aspeed,sys-reset"))
> >>>>>>+ wdt->ctrl |= WDT_CTRL_RESET_SYSTEM;
> >>>>>>+
> >>>>>For backward compatibility, this should default to WDT_CTRL_RESET_SYSTEM
> >>>>>if no optional property is provided.
> >>>>>
> >>>>I had the logic inverted for this property in a previous patch. The
> >>>>property was 'no-system-reset' so that when not present the default was to
> >>>>set WDT_CTRL_RESET_SYSTEM. As it is in this patch, the only way to
> >>>>indicate that no system reset is to be done is to not specify the property.
> >>>>No system reset is desired under circumstances when another wdt engine is to
> >>>>be responsible for this. Given the issue with backward compatibility
> >>>>that's not a solution. Given this, would creating a property
> >>>>'no-system-reset' be acceptable?
> >>>>
> >>>Sorry, I fail to see the problem. There are half a dozen properties. What is the
> >>>problem with having a default if no property is specified ? Your default is "do
> >>>nothing", which does not really make any sense to me. If the user wants the
> >>>watchdog to do nothing, the simple means to accomplish that would be to not
> >>>instantiate it.
> >>>
> >>>Sure, that means specifying "system-reset" is redundant, but I don't see a
> >>>problem with that either. But I do see a problem with loading a watchdog driver
> >>>that doesn't do anything.
> >>>
> >>>If there is really some use case where it makes sense to load a watchdog driver
> >>>and have it do nothing, please explain and provide a respective devicetree
> >>>property. "aspeed,do-nothing" (or whatever similar) doesn't sound good, but
> >>>at least makes it obvious that the driver isn't doing anything besides
> >>>creating a false sense of "the system is watchdog protected".
> >>If system-reset is not wanted there are other properties that might still be
> >>needed, for example
> >>ARM reset only. We'd still want to instantiate it.
> >>
> >But then you would presumably specify that property, so there would be one.
> >The question here is what to do if _no_ property is provided.
> I agree that the default should be to perform a system reset when no
> property is provided. I will make that change. Additionally for backwards
> compatibility the SOC reset should be enabled by default when no property is
> provided. The other parameters are not configured in the watchdog control
> register if no property is provided.
>
> There is still a need to to configure for no system reset. For example,
> optional parameter 'aspeed,no-sys-reset' that can be specified if system
> reset is to be disabled. In addition the default 'SOC reset enabled'
> behavior could be disabled with an optional parameter 'aspeed,no-soc-reset'.
>
> Why would there even be a need configure for no system reset? The external
> mode 'wdt ext: External signal enable after timeout' can be sent off chip
> even if system reset is disabled. The watchdog is doing something in this
> case and would require wdt instantiation.
>

Wouldn't that be "aspeed,external-signal" ?

Guenter

> Hope this is more clear, sorry for the confusion.
>
> Thanks,
> -Chris AST2500 Software Programming Guide
> >Sorry, I don't get your point.
> >
> >Guenter
> >
> >>Thanks,
> >>Chris
> >>>Thanks,
> >>>Guenter
> >>>
> >>>
> >>>>Thanks,
> >>>>Chris
> >>>>
> >>>>>>+ if (of_property_read_bool(np, "aspeed,external-signal"))
> >>>>>>+ wdt->ctrl |= WDT_CTRL_WDT_EXT;
> >>>>>>+
> >>>>>>+ writel(wdt->ctrl, wdt->base + WDT_CTRL);
> >>>>>> if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE) {
> >>>>>> aspeed_wdt_start(&wdt->wdd);
> >>>>>>
> >>--
> >>To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> >>the body of a message to majordomo@vger.kernel.org
> >>More majordomo info at http://vger.kernel.org/majordomo-info.html
>

\
 
 \ /
  Last update: 2017-06-28 18:07    [W:0.057 / U:2.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site