lkml.org 
[lkml]   [2017]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/4] g_NCR5380: PDMA fixes and cleanup
From
Date
Ondrej,

could this be a partial write (target did not transfer the last byte)?

One would suppose the chip posts a phase mismatch in that case ...

Cheers,

Michael


Am 27.06.2017 um 18:28 schrieb Ondrej Zary:
> On Monday 26 June 2017, Ondrej Zary wrote:
>> On Monday 26 June 2017 09:30:33 Finn Thain wrote:
>>> Ondrej, would you please test this new series?
>>>
>>> Changed since v1:
>>> - PDMA transfer residual is calculated earlier.
>>> - End of DMA flag check is now polled (if there is any residual).
>>>
>>> Changed since v2:
>>> - Bail out of transfer loops when Gated IRQ gets asserted.
>>> - Make udelay conditional on board type.
>>> - Drop sg_tablesize patch due to performance regression.
>>>
>>>
>>> Finn Thain (1):
>>> g_NCR5380: Cleanup comments and whitespace
>>>
>>> Ondrej Zary (3):
>>> g_NCR5380: Fix PDMA transfer size
>>> g_NCR5380: End PDMA transfer correctly on target disconnection
>>> g_NCR5380: Re-work PDMA loops
>>>
>>> drivers/scsi/g_NCR5380.c | 239
>>> +++++++++++++++++++++++------------------------ 1 file changed, 116
>>> insertions(+), 123 deletions(-)
>
> BTW. I've probably found the DTC write corruption.
> Added the following check (13 is host buffer index register) - and it triggers
> sometimes: the value is 1 instead of 0. As we use only 16-bit writes, I don't
> see how the value could ever be odd. Looks like a bug in the chip.
> The index register corrupts during the transfer, not after IRQ or timeout. The
> same check at beginning of pwrite() did not trigger.
>
> The index register is not writable so we must(?) reset the PDMA engine to
> recover. However, this quick attempt to fix does not work, maybe we should
> reload the block count and continue?
>
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -595,7 +603,13 @@ static inline int generic_NCR5380_pwrite(struct
> NCR5380_hostdata *hostdata,
> goto out_wait;
> }
> }
> -
> + idx = NCR5380_read(13);
> + if (idx != 0) {
> + printk("host idx=%d, start=%d\n", idx, start);
> + NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
> + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
> + goto out_wait;
> + }
> if (hostdata->io_port && hostdata->io_width == 2)
> outsw(hostdata->io_port + hostdata->c400_host_buf,
> src + start, 64);
>
>

\
 
 \ /
  Last update: 2017-06-27 10:32    [W:2.154 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site