lkml.org 
[lkml]   [2017]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/17] clocksource/timer-riscv: New RISC-V Clocksource
On Wed, 07 Jun 2017 02:43:09 PDT (-0700), marc.zyngier@arm.com wrote:
> On 06/06/17 23:59, Palmer Dabbelt wrote:
>> The RISC-V ISA defines a single RTC as well as an SBI oneshot timer.
>> This timer is present on all RISC-V systems.
>>
>> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
>> ---
>> drivers/clocksource/Kconfig | 8 +++
>> drivers/clocksource/Makefile | 1 +
>> drivers/clocksource/timer-riscv.c | 118 ++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 127 insertions(+)
>> create mode 100644 drivers/clocksource/timer-riscv.c
>>
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index 545d541ae20e..1c2c6e7c7fab 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -612,4 +612,12 @@ config CLKSRC_ST_LPC
>> Enable this option to use the Low Power controller timer
>> as clocksource.
>>
>> +config CLKSRC_RISCV
>> + #bool "Clocksource for the RISC-V platform"
>> + def_bool y if RISCV
>> + depends on RISCV
>> + help
>> + This enables a clocksource based on the RISC-V SBI timer, which is
>> + built in to all RISC-V systems.
>> +
>> endmenu
>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
>> index 2b5b56a6f00f..408ed9d314dc 100644
>> --- a/drivers/clocksource/Makefile
>> +++ b/drivers/clocksource/Makefile
>> @@ -73,3 +73,4 @@ obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o
>> obj-$(CONFIG_H8300_TPU) += h8300_tpu.o
>> obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
>> obj-$(CONFIG_X86_NUMACHIP) += numachip.o
>> +obj-$(CONFIG_CLKSRC_RISCV) += timer-riscv.o
>> diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
>> new file mode 100644
>> index 000000000000..04ef7b9130b3
>> --- /dev/null
>> +++ b/drivers/clocksource/timer-riscv.c
>> @@ -0,0 +1,118 @@
>> +/*
>> + * Copyright (C) 2012 Regents of the University of California
>> + * Copyright (C) 2017 SiFive
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * as published by the Free Software Foundation, version 2.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clocksource.h>
>> +#include <linux/clockchips.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +#include <linux/delay.h>
>> +#include <linux/of.h>
>> +
>> +#include <asm/irq.h>
>> +#include <asm/csr.h>
>> +#include <asm/sbi.h>
>> +#include <asm/delay.h>
>> +
>> +unsigned long riscv_timebase;
>> +
>> +static DEFINE_PER_CPU(struct clock_event_device, clock_event);
>> +
>> +static int riscv_timer_set_next_event(unsigned long delta,
>> + struct clock_event_device *evdev)
>> +{
>> + sbi_set_timer(get_cycles() + delta);
>> + return 0;
>> +}
>> +
>> +static int riscv_timer_set_oneshot(struct clock_event_device *evt)
>> +{
>> + /* no-op; only one mode */
>> + return 0;
>> +}
>> +
>> +static int riscv_timer_set_shutdown(struct clock_event_device *evt)
>> +{
>> + /* can't stop the clock! */
>> + return 0;
>> +}
>> +
>> +static u64 riscv_rdtime(struct clocksource *cs)
>> +{
>> + return get_cycles();
>> +}
>> +
>> +static struct clocksource riscv_clocksource = {
>> + .name = "riscv_clocksource",
>> + .rating = 300,
>> + .read = riscv_rdtime,
>> +#ifdef CONFIG_64BITS
>> + .mask = CLOCKSOURCE_MASK(64),
>> +#else
>> + .mask = CLOCKSOURCE_MASK(32),
>> +#endif /* CONFIG_64BITS */
>> + .flags = CLOCK_SOURCE_IS_CONTINUOUS,
>> +};
>> +
>> +void riscv_timer_interrupt(void)
>> +{
>> + int cpu = smp_processor_id();
>> + struct clock_event_device *evdev = &per_cpu(clock_event, cpu);
>> +
>> + evdev->event_handler(evdev);
>> +}
>> +
>> +void __init init_clockevent(void)
>> +{
>> + int cpu = smp_processor_id();
>> + struct clock_event_device *ce = &per_cpu(clock_event, cpu);
>> +
>> + *ce = (struct clock_event_device){
>> + .name = "riscv_timer_clockevent",
>> + .features = CLOCK_EVT_FEAT_ONESHOT,
>> + .rating = 300,
>> + .cpumask = cpumask_of(cpu),
>> + .set_next_event = riscv_timer_set_next_event,
>> + .set_state_oneshot = riscv_timer_set_oneshot,
>> + .set_state_shutdown = riscv_timer_set_shutdown,
>> + };
>> +
>> + /* Enable timer interrupts */
>> + csr_set(sie, SIE_STIE);
>> +
>> + clockevents_config_and_register(ce, riscv_timebase, 100, 0x7fffffff);
>> +}
>> +
>> +static unsigned long __init of_timebase(void)
>> +{
>> + struct device_node *cpu;
>> + const __be32 *prop;
>> +
>> + cpu = of_find_node_by_path("/cpus");
>> + if (cpu) {
>> + prop = of_get_property(cpu, "timebase-frequency", NULL);
>> + if (prop)
>> + return be32_to_cpu(*prop);
>
> Consider using of_property_read_u32() instead.

Thanks, that's must cleaner.

>
>> + }
>> +
>> + return 10000000;
>
> Is this an architectural guarantee? Or something that is implementation
> specific?

It was just a holdover from before we converted our port to device tree, it's
been fixed.

>
>> +}
>> +
>> +void __init time_init(void)
>> +{
>> + riscv_timebase = of_timebase();
>> + lpj_fine = riscv_timebase / HZ;
>> +
>> + clocksource_register_hz(&riscv_clocksource, riscv_timebase);
>> + init_clockevent();
>> +}
>>

Thanks, I'll put these in the v3 patch set.

\
 
 \ /
  Last update: 2017-06-24 04:03    [W:0.279 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site