lkml.org 
[lkml]   [2017]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/17] irqchip: New RISC-V PLIC Driver
On Wed, 07 Jun 2017 00:55:28 PDT (-0700), Arnd Bergmann wrote:
> On Wed, Jun 7, 2017 at 9:13 AM, Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>>> +struct plic_enable_context {
>>> + atomic_t mask[32]; // 32-bit * 32-entry
>>> +};
>
> You use many '//' style comments in this file, please change them all to '/* */'
> for consistency with kernel coding style.

OK, I fixed them here and in all our other files that had them.

>>> +
>>> +struct plic_priority {
>>> + u32 prio[MAX_DEVICES];
>>> +};
>>> +
>>> +struct plic_data {
>>> + struct irq_chip chip;
>>> + struct irq_domain *domain;
>>> + u32 ndev;
>>> + void __iomem *reg;
>>> + int handlers;
>>> + struct plic_handler *handler;
>>> + char name[30];
>>> +};
>>> +
>>> +struct plic_handler {
>>> + struct plic_hart_context *context;
>>> + struct plic_data *data;
>>> +};
>>> +
>>> +static inline
>>> +struct plic_hart_context *plic_hart_context(struct plic_data *data, size_t i)
>>> +{
>>> + return (struct plic_hart_context *)((char *)data->reg + HART_BASE + HART_SIZE*i);
>>> +}
>
> 'data->reg' is an __iomem pointer, so when you build-test this with 'make C=1',
> you should get a valid warning from sparse about an address space mismatch.
> Please address all the warning from sparse.

I didn't know about sparse. I'll run it on our port and fix everything.

>>> +static void plic_disable(struct plic_data *data, int i, int hwirq)
>>> +{
>>> + struct plic_enable_context *enable = plic_enable_context(data, i);
>>> +
>>> + atomic_and(~(1 << (hwirq % 32)), &enable->mask[hwirq / 32]);
>>> +}
>
> In particular, you must not do atomic operations on MMIO pointers.
> On most architectures these are explicitly disallowed and trap for
> a good reason, as the hardware implementation behind atomics tend
> to rely on the cache controller, while mmio registers are required
> to be uncached.

Sorry about that: the SiFive bus actually supports AMOs natively out to the
every device, even without caches, bit the RISC-V spec allows regions
to be marked as not supporting AMOs. Sometimes a few SiFive-isms sneak in from
before the supervisor spec was written in this particular manner. I've
converted this to a spinlock instead.

https://github.com/riscv/riscv-linux/commit/79b26ca800663399ea7d9dead73f3715deee1a99


>>> + iowrite32(1, &priority->prio[d->hwirq]);
>
> I would normally use 'readl' instead of 'iowrite32'. They may be the same
> on riscv, but they have slightly different meaning in portable drivers.

I assume you meant writel? If so, that makes sense

https://github.com/riscv/riscv-linux/commit/45c968f1f068c35e0a5c8c90ba0776e7bdb6db78

\
 
 \ /
  Last update: 2017-06-24 02:46    [W:0.223 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site