lkml.org 
[lkml]   [2017]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Hi Paul, Maarten,

On 20.06.2017 17:18, Paul Cercueil wrote:
> From: Maarten ter Huurne <maarten@treewalker.org>
>
> We have seen MMC DMA transfers read corrupted data from SDRAM when
> a burst interval ends at physical address 0x10000000. To avoid this
> problem, we remove the final page of low memory from the memory map.
>
> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
> ---
> arch/mips/jz4740/setup.c | 24 ++++++++++++++++++++++++
> arch/mips/kernel/setup.c | 8 ++++++++
> 2 files changed, 32 insertions(+)
>
> v2: No change
>
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index afd84ee966e8..6948b133a15d 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -23,6 +23,7 @@
>
> #include <asm/bootinfo.h>
> #include <asm/mips_machine.h>
> +#include <asm/page.h>
> #include <asm/prom.h>
>
> #include <asm/mach-jz4740/base.h>
> @@ -102,6 +103,29 @@ void __init arch_init_irq(void)
> irqchip_init();
> }
>
> +/*
> + * We have seen MMC DMA transfers read corrupted data from SDRAM when a burst
> + * interval ends at physical address 0x10000000. To avoid this problem, we
> + * remove the final page of low memory from the memory map.
> + */
> +void __init jz4770_reserve_unsafe_for_dma(void)
> +{
> + int i;
> +
> + for (i = 0; i < boot_mem_map.nr_map; i++) {
> + struct boot_mem_map_entry *entry = boot_mem_map.map + i;
> +
> + if (entry->type != BOOT_MEM_RAM)
> + continue;
> +
> + if (entry->addr + entry->size != 0x10000000)
> + continue;
> +
> + entry->size -= PAGE_SIZE;
> + break;
> + }
> +}
> +
> static int __init jz4740_machine_setup(void)
> {
> mips_machine_setup();
> diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
> index 89785600fde4..cccfd7ba89fe 100644
> --- a/arch/mips/kernel/setup.c
> +++ b/arch/mips/kernel/setup.c
> @@ -838,6 +838,14 @@ static void __init arch_mem_init(char **cmdline_p)
>
> parse_early_param();
>
> +#ifdef CONFIG_MACH_JZ4770
> + if (current_cpu_type() == CPU_JZRISC &&
> + mips_machtype == MACH_INGENIC_JZ4770) {
> + extern void __init jz4770_reserve_unsafe_for_dma(void);
> + jz4770_reserve_unsafe_for_dma();
> + }
> +#endif
> +

This part doesn't look good in the platform-agnostic code ... is there a
reason why you wouldn't do that from within plat_mem_setup()?


> if (usermem) {
> pr_info("User-defined physical RAM map:\n");
> print_memory_map();
>


Marcin

\
 
 \ /
  Last update: 2017-06-22 20:01    [W:0.113 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site