lkml.org 
[lkml]   [2017]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH 3/4] ARM: l2x0: add arm,ecc-enable property for aurora
Date
On 23/06/17 02:46, Jan Lübbe wrote:
> Chris,
>
> On So, 2017-06-11 at 22:55 +0000, Chris Packham wrote:
>> On 09/06/17 20:58, Jan Lübbe wrote:
>>> On Do, 2017-06-08 at 16:11 +1200, Chris Packham wrote:
>>>> + if (of_property_read_bool(np, "arm,ecc-enable")) {
>>>> + mask |= L2C_AUX_CTRL_EVTMON_ENABLE;
>>>> + val |= L2C_AUX_CTRL_EVTMON_ENABLE;
>>>> + } else if (of_property_read_bool(np, "arm,ecc-disable")) {
>>>> + mask |= L2C_AUX_CTRL_EVTMON_ENABLE;
>>>> + }
>>>
>>> Unless I misunderstand the code in __l2c_init(), the mask is used to
>>> specify the bits to preserve:
>>> old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
>>> aux &= aux_mask;
>>> aux |= aux_val;
>>>
>>> if (old_aux != aux)
>>> pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n",
>>> old_aux, aux);
>>>
>>> So the arm,ecc-disable property will have no effect. This probably also
>>> applies to patch 2/4. The existing property *-disable code removes the
>>> corresponding bit from the mask.
>>
>> Indeed the disable version should be mask &= ~L2C_AUX_CTRL_EVTMON_ENABLE
>> and I was probably a little lazy to have used the L2C EVTMON instead of
>> adding AURORA specific ones like you have in your series.
>>
>> I'll rebase my series on top of yours and send it direct to you so you
>> can include it in the overall submission.
>
> While picking up your arm,parity-enable and arm,ecc-enable patches for
> my series, I noticed that the mask variable is inverted when merging the
> local changes into aux_val/aux_mask at the end of aurora_of_parse. So I
> now believe your code is correct. ;) I'd appreciate a close look,
> nevertheless.

For my part I tested the enable case but I never tested the disable case
(because u-boot doesn't enable it there's nothing to disable). I can
probably just poke the register before starting the kernel to confirm
the disable case works with whatever masking logic we end up with.

\
 
 \ /
  Last update: 2017-06-22 23:51    [W:0.072 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site