lkml.org 
[lkml]   [2017]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/


圚 2017/6/17 5:51, Arnd Bergmann 写道:
> On Fri, Jun 16, 2017 at 8:51 AM, Bu Tao <butao@hisilicon.com> wrote:
>> add ufs node document for hi3660
>>
>> Signed-off-by: Bu Tao <butao@hisilicon.com>
>> ---
>> .../devicetree/bindings/ufs/hi3660-ufs.txt | 58 ++++++++++++++++++++++
>> 1 file changed, 58 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/ufs/hi3660-ufs.txt
>>
>> diff --git a/Documentation/devicetree/bindings/ufs/hi3660-ufs.txt b/Documentation/devicetree/bindings/ufs/hi3660-ufs.txt
>> new file mode 100644
>> index 000000000000..461afc8ef017
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/ufs/hi3660-ufs.txt
>> @@ -0,0 +1,58 @@
>> +* Hisilicon Universal Flash Storage (UFS) Host Controller
>> +
>> +UFS nodes are defined to describe on-chip UFS hardware macro.
>> +Each UFS Host Controller should have its own node.
>> +
>> +Required properties:
>> +- compatible : compatible list, contains one of the following -
>> + "hisilicon,hi3660-ufs" for hisi ufs host controller
>> + present on Hi3660 chipset.
>> +- reg : should contain UFS register address space & UFS SYS CTRL register address,
>> +- interrupt-parent : interrupt device
>> +- interrupts : interrupt number
>> +- clocks : List of phandle and clock specifier pairs
>> +- clock-names : List of clock input name strings sorted in the same
>> + order as the clocks property. "clk_ref", "clk_phy" is optional
>> +- resets : reset node register, one reset the clk and the other reset the controller
>> +- reset-names : describe reset node register
>> +
>> +Optional properties for board device:
>> +- ufs-hi3660-use-rate-B : specifies UFS rate-B
>> +- ufs-hi3660-broken-fastauto : specifies no fastauto
>> +- ufs-hi3660-use-HS-GEAR3 : specifies UFS HS-GEAR3
>> +- ufs-hi3660-use-HS-GEAR2 : specifies UFS HS-GEAR2
>> +- ufs-hi3660-use-HS-GEAR1 : specifies UFS HS-GEAR1
>> +- ufs-hi3660-broken-clk-gate-bypass : specifies no clk-gate
>> +- ufs-hi3660-use-one-line : specifies UFS use one line work
>> +- reset-gpio : specifies to reset devices
>
> Some of these sound rather generic and might apply to UFS implementations
> other than hi3660, so I'd suggest adding them to the base ufs binding with
> a generic name instead.
>
> Any DT properties that might be useful across multiple implementations
> should be parsed in generic code that gets called by the individual drivers,
> and then the properties that are specific to the integration work done by
> hisilicon should be prefixed with "hisilicon,", but not normally with the
> SoC name: it is quite possible that another SoC will be derived from this
> chip and it should reuse the properties.

I do not know wheher other SoC need to use the optional properties as
abover. So here the name of the optional properties has "hi3660".
>
> (note: this is different from the value of the "compatible" property that
> is meant to be as specific as possible".
>
> Also, please clarify how your binding relates to the ufshcd binding
> in Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt: does
> hi3660 implement any registers that are shared with ufshcd, or does
> it use the same physical interface with a different register set?

No, only show how to use the dt-binding for hi3660 SoC
>
> Arnd
>

\
 
 \ /
  Last update: 2017-06-22 20:02    [W:0.141 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site