lkml.org 
[lkml]   [2017]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v3 2/6] dt-bindings: spi/core: add wakeup-source optional property
Date
Update document devicetree bindings to support "wakeup-source" property.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
---

Changes in v3: None

Documentation/devicetree/bindings/spi/spi-bus.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index 1f6e86f..0fa1ccf 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -77,6 +77,7 @@ All slave nodes can contain the following optional properties:
Defaults to 1 if not present.
- spi-rx-delay-us - Microsecond delay after a read transfer.
- spi-tx-delay-us - Microsecond delay after a write transfer.
+- wakeup-source - Device can be used as a wakeup source.

Some SPI controllers and devices support Dual and Quad SPI transfer mode.
It allows data in the SPI system to be transferred using 2 wires (DUAL) or 4
--
2.1.4

\
 
 \ /
  Last update: 2017-06-21 12:04    [W:0.299 / U:1.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site