lkml.org 
[lkml]   [2017]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V2 0/2] measure SMI cost (user)
Date
Hi Arnaldo and Jirka,

Ping.
Any comments for the patch?

Thanks,
Kan

> Subject: RE: [PATCH V2 0/2] measure SMI cost (user)
>
> Hi Jirka,
>
> Have you got a chance to try the code?
> Are you OK with the patch?
>
> Thanks,
> Kan
>
> >
> > Em Fri, Jun 02, 2017 at 03:45:11PM +0000, Liang, Kan escreveu:
> > > > > On Mon, May 29, 2017 at 02:52:39PM +0200, Peter Zijlstra wrote:
> > > > > > On Mon, May 29, 2017 at 02:46:37PM +0200, Jiri Olsa wrote:
> > > > > > > for some reason I can't get single SMI count generated, is
> > > > > > > there a setup/bench that would provoke that?
> >
> > > > > > Not having SMIs is a good thing ;-) Not sure we can tickle
> > > > > > them in a reliable way.
> >
> > > > > yea I saw some counts last time, now just zero so I was
> > > > > wondering if it's working
> >
> > > > We have internal test case which can generate SMI, but I cannot
> > > > publish the test case. Sorry about that.
> >
> > > APM_CNT (0xB2) could be used to trigger SMI#.
> >
> > Here if I run the following 'perf stat' command and press the mute
> > button (the one sharing F1 in a thinkpad t450s it triggers SMIs,
> > toggle it in quick sucession and it generates more, etc:
> >
> > [root@jouet ~]# perf stat -I 1000 -e msr/smi/
> > # time counts unit events
> > 1.000103173 0 msr/smi/
> > 2.000278816 4 msr/smi/
> > 3.000472630 4 msr/smi/
> > 4.000743916 0 msr/smi/
> > 5.001369358 4 msr/smi/
> > 6.001668033 0 msr/smi/
> > 7.001852603 4 msr/smi/
> > 8.002108269 12 msr/smi/
> > 9.002367312 0 msr/smi/
> > ^C 9.961897866 0 msr/smi/
> >
> > [root@jouet ~]#
> >
> > - Arnaldo
> >
> > > It's documented in PCH datasheet.
> > > https://www.intel.com/content/dam/www/public/us/en/
> > > documents/datasheets/9-series-chipset-pch-datasheet.pdf
> > >
> > > APM_CNT-Advanced Power Management Control Port Register I/O
> Address:
> > > B2h
> > > Attribute: R/W
> > > Default Value: 00h
> > > Size: 8 bits
> > > Lockable: No
> > > Usage: Legacy Only
> > > Power Well: Core
> > > Bit Description
> > > 7:0 Used to pass an APM command between the OS and the SMI handler.
> > > Writes to this port not only store data in the APMC register, but
> > > also generates an SMI# when the APMC_EN bit is set.
> > >
> > > You can write a byte to port 0xB2 to trigger an SMI#
> > >
> > > Thanks,
> > > Kan

\
 
 \ /
  Last update: 2017-06-20 15:44    [W:1.266 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site