lkml.org 
[lkml]   [2017]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 02/11] gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
Date
Commtech adapters need the MPIOs for internal purposes, and the
gpio-exar driver already refused to pick them up. But there is actually
no point in even creating the underlying platform device.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/gpio/gpio-exar.c | 3 ---
drivers/tty/serial/8250/8250_exar.c | 4 +++-
2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index 081076771217..006a9a67c2a4 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -124,9 +124,6 @@ static int gpio_exar_probe(struct platform_device *pdev)
void __iomem *p;
int index, ret;

- if (pcidev->vendor != PCI_VENDOR_ID_EXAR)
- return -ENODEV;
-
/*
* Map the pci device to get the register addresses.
* We will need to read and write those registers to control
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 8984e8b2d524..c29c7e675890 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -245,7 +245,9 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
/* Setup Multipurpose Input/Output pins. */
setup_gpio(pcidev, p);

- port->port.private_data = xr17v35x_register_gpio(pcidev);
+ if (pcidev->vendor == PCI_VENDOR_ID_EXAR)
+ port->port.private_data =
+ xr17v35x_register_gpio(pcidev);
}

return 0;
--
2.12.3
\
 
 \ /
  Last update: 2017-06-05 00:07    [W:0.104 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site