lkml.org 
[lkml]   [2017]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v6 08/11] arm64: dts: Add GPIO DT nodes for Stingray SOC
    Date
    From: Pramod Kumar <pramod.kumar@broadcom.com>

    The GPIOs on Stingray SOC are based on iProc GPIOs hence
    using this we add GPIO DT nodes for Stingray SOC.

    Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
    Reviewed-by: Ray Jui <rjui@broadcom.com>
    Reviewed-by: Scott Branden <sbranden@broadcom.com>
    ---
    .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 34 ++++++++++++++++++++++
    1 file changed, 34 insertions(+)

    diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
    index 639c25d..e91debe 100644
    --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
    +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
    @@ -251,6 +251,14 @@
    ranges = <0x0 0x0 0x66400000 0x100000>;

    #include "stingray-clock.dtsi"
    +
    + gpio_crmu: gpio@00024800 {
    + compatible = "brcm,iproc-gpio";
    + reg = <0x00024800 0x4c>;
    + ngpios = <6>;
    + #gpio-cells = <2>;
    + gpio-controller;
    + };
    };

    hsls {
    @@ -261,6 +269,32 @@

    #include "stingray-pinctrl.dtsi"

    + gpio_hsls: gpio@000d0000 {
    + compatible = "brcm,iproc-gpio";
    + reg = <0x000d0000 0x864>;
    + ngpios = <151>;
    + #gpio-cells = <2>;
    + gpio-controller;
    + interrupt-controller;
    + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
    + gpio-ranges = <&pinmux 0 0 16>,
    + <&pinmux 16 71 2>,
    + <&pinmux 18 131 8>,
    + <&pinmux 26 83 6>,
    + <&pinmux 32 123 4>,
    + <&pinmux 36 43 24>,
    + <&pinmux 60 89 2>,
    + <&pinmux 62 73 4>,
    + <&pinmux 66 95 28>,
    + <&pinmux 94 127 4>,
    + <&pinmux 98 139 10>,
    + <&pinmux 108 16 27>,
    + <&pinmux 135 77 6>,
    + <&pinmux 141 67 4>,
    + <&pinmux 145 149 6>,
    + <&pinmux 151 91 4>;
    + };
    +
    uart0: uart@00100000 {
    device_type = "serial";
    compatible = "snps,dw-apb-uart";
    --
    2.7.4
    \
     
     \ /
      Last update: 2017-06-05 00:07    [W:5.737 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site