lkml.org 
[lkml]   [2017]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/13] efi/capsule: Add support for Quark security header
Date
From: Jan Kiszka <jan.kiszka@siemens.com>

The firmware for Quark X102x prepends a security header to the capsule
which is needed to support the mandatory secure boot on this processor.
The header can be detected by checking for the "_CSH" signature and -
to avoid any GUID conflict - validating its size field to contain the
expected value. Then we need to look for the EFI header right after the
security header and pass the real header to __efi_capsule_setup_info.

To be minimal invasive and maximal safe, the quirk version of
efi_capsule_identify_image is only effective on Quark processors.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Tested-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/x86/platform/efi/quirks.c | 137 +++++++++++++++++++++++++++++++++++++++++
drivers/firmware/efi/Kconfig | 9 +++
2 files changed, 146 insertions(+)

diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index 26615991d69c..93867ee08eac 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -15,12 +15,66 @@
#include <asm/e820/api.h>
#include <asm/efi.h>
#include <asm/uv/uv.h>
+#include <asm/cpu_device_id.h>

#define EFI_MIN_RESERVE 5120

#define EFI_DUMMY_GUID \
EFI_GUID(0x4424ac57, 0xbe4b, 0x47dd, 0x9e, 0x97, 0xed, 0x50, 0xf0, 0x9f, 0x92, 0xa9)

+#define QUARK_CSH_SIGNATURE 0x5f435348 /* _CSH */
+#define QUARK_SECURITY_HEADER_SIZE 0x400
+
+/*
+ * Header prepended to the standard EFI capsule on Quark systems the are based
+ * on Intel firmware BSP.
+ * @csh_signature: Unique identifier to sanity check signed module
+ * presence ("_CSH").
+ * @version: Current version of CSH used. Should be one for Quark A0.
+ * @modulesize: Size of the entire module including the module header
+ * and payload.
+ * @security_version_number_index: Index of SVN to use for validation of signed
+ * module.
+ * @security_version_number: Used to prevent against roll back of modules.
+ * @rsvd_module_id: Currently unused for Clanton (Quark).
+ * @rsvd_module_vendor: Vendor Identifier. For Intel products value is
+ * 0x00008086.
+ * @rsvd_date: BCD representation of build date as yyyymmdd, where
+ * yyyy=4 digit year, mm=1-12, dd=1-31.
+ * @headersize: Total length of the header including including any
+ * padding optionally added by the signing tool.
+ * @hash_algo: What Hash is used in the module signing.
+ * @cryp_algo: What Crypto is used in the module signing.
+ * @keysize: Total length of the key data including including any
+ * padding optionally added by the signing tool.
+ * @signaturesize: Total length of the signature including including any
+ * padding optionally added by the signing tool.
+ * @rsvd_next_header: 32-bit pointer to the next Secure Boot Module in the
+ * chain, if there is a next header.
+ * @rsvd: Reserved, padding structure to required size.
+ *
+ * See also QuartSecurityHeader_t in
+ * Quark_EDKII_v1.2.1.1/QuarkPlatformPkg/Include/QuarkBootRom.h
+ * from https://downloadcenter.intel.com/download/23197/Intel-Quark-SoC-X1000-Board-Support-Package-BSP
+ */
+struct quark_security_header {
+ u32 csh_signature;
+ u32 version;
+ u32 modulesize;
+ u32 security_version_number_index;
+ u32 security_version_number;
+ u32 rsvd_module_id;
+ u32 rsvd_module_vendor;
+ u32 rsvd_date;
+ u32 headersize;
+ u32 hash_algo;
+ u32 cryp_algo;
+ u32 keysize;
+ u32 signaturesize;
+ u32 rsvd_next_header;
+ u32 rsvd[2];
+};
+
static efi_char16_t efi_dummy_name[6] = { 'D', 'U', 'M', 'M', 'Y', 0 };

static bool efi_no_storage_paranoia;
@@ -501,3 +555,86 @@ bool efi_poweroff_required(void)
{
return acpi_gbl_reduced_hardware || acpi_no_s5;
}
+
+#ifdef CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH
+
+static int qrk_capsule_setup_info(struct capsule_info *cap_info, void **pkbuff,
+ size_t hdr_bytes)
+{
+ struct quark_security_header *csh = *pkbuff;
+
+ /* Only process data block that is larger than the security header */
+ if (hdr_bytes < sizeof(struct quark_security_header))
+ return 0;
+
+ if (csh->csh_signature != QUARK_CSH_SIGNATURE ||
+ csh->headersize != QUARK_SECURITY_HEADER_SIZE)
+ return 1;
+
+ /* Only process data block if EFI header is included */
+ if (hdr_bytes < QUARK_SECURITY_HEADER_SIZE +
+ sizeof(efi_capsule_header_t))
+ return 0;
+
+ pr_debug("Quark security header detected\n");
+
+ if (csh->rsvd_next_header != 0) {
+ pr_err("multiple Quark security headers not supported\n");
+ return -EINVAL;
+ }
+
+ *pkbuff += csh->headersize;
+ cap_info->total_size = csh->headersize;
+
+ /*
+ * Update the first page pointer to skip over the CSH header.
+ */
+ cap_info->pages[0] += csh->headersize;
+
+ return 1;
+}
+
+#define ICPU(family, model, quirk_handler) \
+ { X86_VENDOR_INTEL, family, model, X86_FEATURE_ANY, \
+ (unsigned long)&quirk_handler }
+
+static const struct x86_cpu_id efi_capsule_quirk_ids[] = {
+ ICPU(5, 9, qrk_capsule_setup_info), /* Intel Quark X1000 */
+ { }
+};
+
+int efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff,
+ size_t hdr_bytes)
+{
+ int (*quirk_handler)(struct capsule_info *, void **, size_t);
+ const struct x86_cpu_id *id;
+ int ret;
+
+ if (hdr_bytes < sizeof(efi_capsule_header_t))
+ return 0;
+
+ cap_info->total_size = 0;
+
+ id = x86_match_cpu(efi_capsule_quirk_ids);
+ if (id) {
+ /*
+ * The quirk handler is supposed to return
+ * - a value > 0 if the setup should continue, after advancing
+ * kbuff as needed
+ * - 0 if not enough hdr_bytes are available yet
+ * - a negative error code otherwise
+ */
+ quirk_handler = (typeof(quirk_handler))id->driver_data;
+ ret = quirk_handler(cap_info, &kbuff, hdr_bytes);
+ if (ret <= 0)
+ return ret;
+ }
+
+ memcpy(&cap_info->header, kbuff, sizeof(cap_info->header));
+
+ cap_info->total_size += cap_info->header.imagesize;
+
+ return __efi_capsule_setup_info(cap_info);
+}
+
+#endif
diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
index 2e78b0b96d74..394db40ed374 100644
--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -112,6 +112,15 @@ config EFI_CAPSULE_LOADER

Most users should say N.

+config EFI_CAPSULE_QUIRK_QUARK_CSH
+ boolean "Add support for Quark capsules with non-standard headers"
+ depends on X86 && !64BIT
+ select EFI_CAPSULE_LOADER
+ default y
+ help
+ Add support for processing Quark X1000 EFI capsules, whose header
+ layout deviates from the layout mandated by the UEFI specification.
+
config EFI_TEST
tristate "EFI Runtime Service Tests Support"
depends on EFI
--
2.9.3
\
 
 \ /
  Last update: 2017-06-05 00:13    [W:0.201 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site