lkml.org 
[lkml]   [2017]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 1/3] PCI: hisi: Add DT binding for PCIe of Kirin SoC series
From
Date
Hi Xiaowei,

On 2017/6/19 11:44, Wei Xu wrote:
> Hi Xiaowei,
>
> On 2017/6/19 11:23, Xiaowei Song wrote:
>
> Please add some commit message.
>
>> Cc: Guodong Xu <guodong.xu@linaro.org>
>> Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com>
>> Acked-by: Rob Herring <robh@kernel.org>
>> ---
>
> I have picked up the patch from [1] and
> the pull request has been merged into ARM SoC tree.
> Please do not resend the same patch.
> Thanks!
>
> [1]:https://lkml.org/lkml/2017/6/14/1055

Sorry, the above link is wrong.
It should be https://lkml.org/lkml/2017/6/14/1056

BR,
Wei

>
> Best Regards,
> Wei
>
>> .../devicetree/bindings/pci/kirin-pcie.txt | 55 ++++++++++++++++++++++
>> 1 file changed, 55 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
>>
>> diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
>> new file mode 100644
>> index 000000000000..c2be01270ec5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
>> @@ -0,0 +1,55 @@
>> +HiSilicon Kirin SoCs PCIe host DT description
>> +
>> +Kirin PCIe host controller is based on Designware PCI core.
>> +It shares common functions with PCIe Designware core driver
>> +and inherits common properties defined in
>> +Documentation/devicetree/bindings/pci/designware-pci.txt.
>> +
>> +Additional properties are described here:
>> +
>> +Required properties
>> +- compatible:
>> + "hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
>> +- reg: Should contain rc_dbi, apb, phy, config registers location and length.
>> +- reg-names: Must include the following entries:
>> + "dbi": controller configuration registers;
>> + "apb": apb Ctrl register defined by Kirin;
>> + "phy": apb PHY register defined by Kirin;
>> + "config": PCIe configuration space registers.
>> +- reset-gpios: The gpio to generate PCIe perst assert and deassert signal.
>> +
>> +Optional properties:
>> +
>> +Example based on kirin960:
>> +
>> + pcie@f4000000 {
>> + compatible = "hisilicon,kirin960-pcie";
>> + reg = <0x0 0xf4000000 0x0 0x1000>,
>> + <0x0 0xff3fe000 0x0 0x1000>,
>> + <0x0 0xf3f20000 0x0 0x40000>,
>> + <0x0 0xf4000000 0x0 0x2000>;
>> + reg-names = "dbi","apb","phy", "config";
>> + bus-range = <0x0 0x1>;
>> + #address-cells = <3>;
>> + #size-cells = <2>;
>> + device_type = "pci";
>> + ranges = <0x02000000 0x0 0x0
>> + 0x0 0xf5000000
>> + 0x0 0x2000000>;
>> + num-lanes = <1>;
>> + #interrupt-cells = <1>;
>> + interrupt-map-mask = <0xf800 0 0 7>;
>> + interrupt-map = <0x0 0 0 1 &gic 0 282 4>,
>> + <0x0 0 0 2 &gic 0 283 4>,
>> + <0x0 0 0 3 &gic 0 284 4>,
>> + <0x0 0 0 4 &gic 0 285 4>;
>> + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
>> + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
>> + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
>> + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
>> + <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
>> + clock-names = "pcie_phy_ref", "pcie_aux",
>> + "pcie_apb_phy", "pcie_apb_sys",
>> + "pcie_aclk";
>> + reset-gpios = <&gpio11 1 0>;
>> + };
>>

\
 
 \ /
  Last update: 2017-06-19 12:54    [W:0.048 / U:1.868 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site