lkml.org 
[lkml]   [2017]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 0/3] provide imx rproc driver
From
Date
Hi Sanchayan,

On 19.06.2017 07:13, Sanchayan wrote:
> Hello Oleksij,
>
> On 17-06-14 22:48:52, Oleksij Rempel wrote:
>> Hallo all,
>>
>> this is RFC patchset to provide remoteproc functionality on
>> imx7d SoC.
>> Since current kernel do not have devicetrees for board which
>> I used for testing, this RFC patchset includes this too.
>>
>> For testing I used this simple counter written in ASM:
>> ======================================
>> .syntax unified
>> .text
>> .thumb
>> .int 0x10020000 @ Initial SP value
>> .int reset + 1
>>
>> reset:
>>
>> mov r0, #0x55
>> ldr r1, =(0x40)
>> 1:
>> str r0, [r1]
>> add r0, 1
>> b 1b
>>
>> /* Dummy data, required by remoteproc loader */
>> /* Please FIXME, this part seem to be incorrect */
>> .data
>> .section .resource_table, "aw"
>> .word 1, 0, 0, 0 /* struct resource_table base */
>> .word 0 /* uint32_t offset[1] */
>> ============================================================
>> compiled with:
>> ${CROSS}as -o imx7m4.o imx7m4.S
>> ${CROSS}ld -Ttext=0x0 -o imx7m4.elf imx7m4.o
>> cp imx7m4.elf /srv/nfs/sid-armhf/lib/firmware/rproc-imx_rproc-fw
>>
>> Functionality was confirmed with current OpenOCD master.
>> OpenOCD cfg file can be found here:
>> https://github.com/olerem/openocd/blob/imx7-2017.06.14/tcl/target/imx7.cfg
>>
>> Comment and suggestions are welcome.
>
> Have you by chance also tried testing this with FreeRTOS code running on the
> M4 side?

no, currently my priority is to provide basic functionality with easy
understandable target code and dependencies.

\
 
 \ /
  Last update: 2017-06-19 09:31    [W:0.122 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site