lkml.org 
[lkml]   [2017]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/9] ARM: dts: imx6ul-isiot: Add Sound card with codec node
On Thu, Jun 15, 2017 at 01:01:22PM +0530, Jagan Teki wrote:
> > I feel the abstraction is wrong from the beginning. Ideally, we should
> > have something like below.
> >
> > - imx6ul-isiot.dtsi
> > - imx6ul-isiot-kit.dts and imx6ul-isiot-carrier.dts
> >
> > The -isiot should have everything on SoM and common stuff between -kit
> > and -carrier boards, while -kit and -carrier include -isiot and contains
> > the base-board specific things. The -isiot can have both emmc and nand
> > devices with "disabled" status, and let firmware turn device on per SoM
> > it boots. In that case, the abstraction level can be less and clearer.
> >
> > Thoughts?
>
> So,even the common stuff (lcdif, ts and etc) should be in -isiot.dtsi

Yes, anything common can be in -isiot.dtsi.

> and make it "disabled" and let them enabled on respective dts. this
> what you mentioned here?

It doesn't matter. If the lcd/touch is same on -kit and -carrier, you
can even have them enabled by default in -isiot.dtsi. The -kit.dts and
-carrier.dts are there to accommodate base-board specific differences.

Shawn

\
 
 \ /
  Last update: 2017-06-15 09:52    [W:0.054 / U:1.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site