lkml.org 
[lkml]   [2017]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/7] drm/vc4: Use drm_mode_vrefresh() in DSI fixup, in case vrefresh is 0.
Date
I'm not sure what changed where I started getting vrefresh=0 from the
mode to be fixed up.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
drivers/gpu/drm/vc4/vc4_dsi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index 629d372633e6..fca4d7fd677e 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -866,7 +866,9 @@ static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
adjusted_mode->clock = pixel_clock_hz / 1000 + 1;

/* Given the new pixel clock, adjust HFP to keep vrefresh the same. */
- adjusted_mode->htotal = pixel_clock_hz / (mode->vrefresh * mode->vtotal);
+ adjusted_mode->htotal = pixel_clock_hz / (drm_mode_vrefresh(mode) *
+ mode->vtotal);
+
adjusted_mode->hsync_end += adjusted_mode->htotal - mode->htotal;
adjusted_mode->hsync_start += adjusted_mode->htotal - mode->htotal;

--
2.11.0
\
 
 \ /
  Last update: 2017-06-15 22:42    [W:1.294 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site