lkml.org 
[lkml]   [2017]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH v5 11/16] arm64: zynqmp: Add generic compatible string for I2C EEPROM
Date
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>

---

Changes in v5: None
Changes in v4:
- Only use the atmel manufacturer in the compatible string instead of
keeping the deprecated ones (Rob Herring).

Changes in v3: None
Changes in v2: None

arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index ef1b9e573af0..53907b7a7fd9 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -55,7 +55,7 @@
status = "okay";
clock-frequency = <400000>;
eeprom@54 {
- compatible = "at,24c64";
+ compatible = "atmel,24c64";
reg = <0x54>;
};
};
@@ -64,7 +64,7 @@
status = "okay";
clock-frequency = <400000>;
eeprom@55 {
- compatible = "at,24c64";
+ compatible = "atmel,24c64";
reg = <0x55>;
};
};
--
2.9.3
\
 
 \ /
  Last update: 2017-06-15 20:57    [W:0.290 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site