Messages in this thread | | | Subject | Re: [PATCH v2 2/2] soc: brcmstb: Add driver for DPFE | From | Florian Fainelli <> | Date | Wed, 14 Jun 2017 14:32:54 -0700 |
| |
On 06/14/2017 09:34 AM, Markus Mayer wrote: > On 13 June 2017 at 17:03, Florian Fainelli <f.fainelli@gmail.com> wrote: >> Hi Markus, >> >> On 06/13/2017 03:37 PM, Markus Mayer wrote: >>> From: Markus Mayer <mmayer@broadcom.com> >>> >>> This driver allows access to DRAM properties, such as the refresh rate, >>> via the Broadcom STB DDR PHY Front End (DPFE). The refresh rate can be >>> used as indirect indicator of the DRAM temperature. >>> >>> The driver also allows setting of the sampling interval. >>> >>> Signed-off-by: Markus Mayer <mmayer@broadcom.com> >>> --- >>> MAINTAINERS | 8 + >>> drivers/soc/bcm/brcmstb/Makefile | 2 +- >>> drivers/soc/bcm/brcmstb/dpfe.c | 689 +++++++++++++++++++++++++++++++++++++++ >>> 3 files changed, 698 insertions(+), 1 deletion(-) >>> create mode 100644 drivers/soc/bcm/brcmstb/dpfe.c >>> >>> diff --git a/MAINTAINERS b/MAINTAINERS >>> index f7d568b..04f0be6 100644 >>> --- a/MAINTAINERS >>> +++ b/MAINTAINERS >>> @@ -2864,6 +2864,14 @@ S: Maintained >>> F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt >>> F: drivers/cpufreq/brcmstb* >>> >>> +BROADCOM STB SOC DPFE DRIVER >>> +M: Markus Mayer <mmayer@broadcom.com> >>> +M: bcm-kernel-feedback-list@broadcom.com >>> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) >>> +S: Maintained >>> +F: Documentation/devicetree/bindings/soc/bcm/brcm,dpfe-cpu.txt >>> +F: drivers/misc/brcmstb-dpfe.c >> >> Just one nit: this should be drivers/soc/bcm/brcmstb/dpfe.c, other than >> that, I just need an Ack from Rob on the binding, and I will queue this >> up, thanks! > > Oops. Thanks for catching that. Would you like me to re-send or will > you fix up that path on your end?
I can fix it up if Rob is happy with the current binding, if you need to resubmit, please fix that as well. Thanks! -- -- Florian
| |