lkml.org 
[lkml]   [2017]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] ARM: dts: tps65217: Add power button interrupt to the common tps65217.dtsi file
* Enric Balletbo i Serra <enric.balletbo@collabora.com> [170612 14:28]:
> The interrupt for power button is static data that comes from the
> datasheet, there is no reason to need to define this value on every
> board so seams reasonable put this information into the common tps65217
> file.

I think there's a problem with these patches where we no longer know
if the interrupts are wired up on a board. For example, if the USB PHY
VBUS interrupt is not connected, the phy driver needs poll the
cable state.

And on some PMICs some pins can be muxed to GPIO mode, don't
remember if that can be done with tps65217.

Regards,

Tony

\
 
 \ /
  Last update: 2017-06-13 09:36    [W:0.638 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site