lkml.org 
[lkml]   [2017]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V3 5/7] tty: serial: lpuart: add imx7ulp support
Date
From: Dong Aisheng <aisheng.dong@nxp.com> Sent: Monday, June 12, 2017 11:37 PM
>The lpuart of imx7ulp is basically the same as ls1021a. It's also
>32 bit width register, but unlike ls1021a, it's little endian.
>Besides that, imx7ulp lpuart has a minor different register layout from ls1021a
>that it has four extra registers (verid, param, global,
>pincfg) located at the beginning of register map, which are currently not used
>by the driver and less to be used later.
>
>To ease the register difference handling, we add a reg_off member in
>lpuart_soc_data structure to represent if the normal lpuart32_{read|write}
>requires plus a offset to hide the issue.
>
>Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>Cc: Jiri Slaby <jslaby@suse.com>
>Cc: Stefan Agner <stefan@agner.ch>
>Cc: Mingkai Hu <Mingkai.Hu@nxp.com>
>Cc: Yangbo Lu <yangbo.lu@nxp.com>
>Cc: Fugang Duan <fugang.duan@nxp.com>
>Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
>
>---
>ChangeLog:
>v2->v3:
> * use standard port->iotype to represent the endians.
>v1->v2:
> * remove lpuart_reg_off according to Stefan's suggestion
>---
> drivers/tty/serial/fsl_lpuart.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
>diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index
>bbf47a0..9d05e53 100644
>--- a/drivers/tty/serial/fsl_lpuart.c
>+++ b/drivers/tty/serial/fsl_lpuart.c
>@@ -231,6 +231,9 @@
> #define DEV_NAME "ttyLP"
> #define UART_NR 6
>
>+/* IMX lpuart has four extra unused regs located at the beginning */
>+#define IMX_REG_OFF 0x10
>+
> struct lpuart_port {
> struct uart_port port;
> struct clk *clk;
>@@ -259,6 +262,7 @@ struct lpuart_port {
>
> struct lpuart_soc_data {
> char iotype;
>+ u8 reg_off;
> };
>
> static const struct lpuart_soc_data vf_data = { @@ -267,12 +271,17 @@ static
>const struct lpuart_soc_data vf_data = {
>
> static const struct lpuart_soc_data ls_data = {
> .iotype = UPIO_MEM32BE,
>+};
>
>+static struct lpuart_soc_data imx_data = {
>+ .iotype = UPIO_MEM32,
>+ .reg_off = IMX_REG_OFF,
> };
>
> static const struct of_device_id lpuart_dt_ids[] = {
> { .compatible = "fsl,vf610-lpuart", .data = &vf_data, },
> { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, },
>+ { .compatible = "fsl,imx7ulp-lpuart", .data = &imx_data, },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, lpuart_dt_ids); @@ -2020,6 +2029,7 @@ static
>int lpuart_probe(struct platform_device *pdev)
> if (IS_ERR(sport->port.membase))
> return PTR_ERR(sport->port.membase);
>
>+ sport->port.membase += sdata->reg_off;
> sport->port.mapbase = res->start;

Also update the mapbase.

> sport->port.dev = &pdev->dev;
> sport->port.type = PORT_LPUART;
>--
>2.7.4

\
 
 \ /
  Last update: 2017-06-13 05:02    [W:0.111 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site