lkml.org 
[lkml]   [2017]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: mvebu: Add PWM properties for armada-38x
Date
Add the required properties to the GPIO nodes for them to be used as PWM
lines.

Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>

---

Hi everyone,

this patch uses "marvell,armada-370-gpio" for the compatible property
and as such depends on the rename of the property to still make it in in
time for 4.12 ("gpio: mvebu: change compatible string for PWM support").
Otherwise the compatible string will need to be amended to
"marvell,armada-370-xp-gpio".

Checked the functional spec and the register ranges and offsets are the
same as for armada-xp. Likely the same holds true for the armada-39x
family, though I neither have access to the spec nor any such hardware.

Ralph
---
arch/arm/boot/dts/armada-38x.dtsi | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 8b165c3..af31f5d 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -312,31 +312,39 @@
};

gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
};

gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <28>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
};

systemc: system-controller@18200 {
--
2.10.2
\
 
 \ /
  Last update: 2017-06-01 22:12    [W:2.082 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site