lkml.org 
[lkml]   [2017]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3.16 127/212] ath9k: use correct OTP register offsets for the AR9340 and AR9550
3.16.44-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Lamparter <chunkeey@googlemail.com>

commit c9f1e32600816d695f817477d56490bfc2ba43c6 upstream.

This patch fixes the OTP register definitions for the AR934x and AR9550
WMAC SoC.

Previously, the ath9k driver was unable to initialize the integrated
WMAC on an Aerohive AP121:

| ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004
| ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004
| ath: phy0: Unable to initialize hardware; initialization status: -5
| ath9k ar934x_wmac: failed to initialize device
| ath9k: probe of ar934x_wmac failed with error -5

It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA
definitions contain a typo.

Cc: Gabor Juhos <juhosg@openwrt.org>
Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550"
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -73,13 +73,13 @@
#define AR9300_OTP_BASE \
((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000)
#define AR9300_OTP_STATUS \
- ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18)
+ ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x31018 : 0x15f18)
#define AR9300_OTP_STATUS_TYPE 0x7
#define AR9300_OTP_STATUS_VALID 0x4
#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
#define AR9300_OTP_STATUS_SM_BUSY 0x1
#define AR9300_OTP_READ_DATA \
- ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c)
+ ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3101c : 0x15f1c)

enum targetPowerHTRates {
HT_TARGET_RATE_0_8_16,
\
 
 \ /
  Last update: 2017-06-01 18:17    [W:0.672 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site