lkml.org 
[lkml]   [2017]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V1 02/15] spmi: pmic-arb: rename spmi_pmic_arb_dev to spmi_pmic_arb
Thanks Stephen for reviewing the patches. Responses inline.

Thanks,
Kiran

On 2017-05-31 06:16, Stephen Boyd wrote:
> On 05/30, Kiran Gunda wrote:
>> From: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
>>
>> Usually *_dev best used for structures that embed a struct device in
>> them. spmi_pmic_arb_dev doesn't embed one. It is simply a driver data
>> structure. Use an appropriate name for it.
>>
>> Also there are many places in the driver that left shift the bit to
>> generate a bit mask. Replace it with the BIT() macro.
>
> That would be a different patch because the subject doesn't even
> mention this.
>
Sure. Agree. Will split this in to different patch.
>>
>> Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
>> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
>> ---
>> drivers/spmi/spmi-pmic-arb.c | 164
>> +++++++++++++++++++++----------------------
>
> Would also be nice if you ran scripts/objdiff on this so we can
> be confident the code didn't change.
>
Sure. Will do that in the next patch.

>> 1 file changed, 82 insertions(+), 82 deletions(-)
>>
>> diff --git a/drivers/spmi/spmi-pmic-arb.c
>> b/drivers/spmi/spmi-pmic-arb.c
>> index df463d4..7f918ea 100644
>> --- a/drivers/spmi/spmi-pmic-arb.c
>> +++ b/drivers/spmi/spmi-pmic-arb.c
>> @@ -58,10 +58,10 @@
>>
>> /* Channel Status fields */
>> enum pmic_arb_chnl_status {
>> - PMIC_ARB_STATUS_DONE = (1 << 0),
>> - PMIC_ARB_STATUS_FAILURE = (1 << 1),
>> - PMIC_ARB_STATUS_DENIED = (1 << 2),
>> - PMIC_ARB_STATUS_DROPPED = (1 << 3),
>> + PMIC_ARB_STATUS_DONE = BIT(0),
>> + PMIC_ARB_STATUS_FAILURE = BIT(1),
>> + PMIC_ARB_STATUS_DENIED = BIT(2),
>> + PMIC_ARB_STATUS_DROPPED = BIT(3),
>> };
>>
>> /* Command register fields */
>> @@ -99,7 +99,7 @@ enum pmic_arb_cmd_op_code {
>> struct pmic_arb_ver_ops;
>>
>> /**
>> - * spmi_pmic_arb_dev - SPMI PMIC Arbiter object
>> + * spmi_pmic_arb - SPMI PMIC Arbiter object
>> *
>> * @rd_base: on v1 "core", on v2 "observer" register base off DT.
>> * @wr_base: on v1 "core", on v2 "chnls" register base off DT.
>> @@ -120,7 +120,7 @@ enum pmic_arb_cmd_op_code {
>> * @ppid_to_chan in-memory copy of PPID -> channel (APID) mapping
>> table.
>> * v2 only.
>> */
>> -struct spmi_pmic_arb_dev {
>> +struct spmi_pmic_arb {
>> void __iomem *rd_base;
>> void __iomem *wr_base;
>> void __iomem *intr;
>> @@ -164,10 +164,10 @@ struct spmi_pmic_arb_dev {
>> * on v2 offset of SPMI_PIC_IRQ_CLEARn.
>> */
>> struct pmic_arb_ver_ops {
>> - int (*mode)(struct spmi_pmic_arb_dev *dev, u8 sid, u16 addr,
>> + int (*mode)(struct spmi_pmic_arb *dev, u8 sid, u16 addr,
>
> But we leave dev here? I'm losing faith that this patch is
> worthwhile.
Ok. As per your suggestion we will drop this renaming patch.

>
>> mode_t *mode);
>> /* spmi commands (read_cmd, write_cmd, cmd) functionality */
>> - int (*offset)(struct spmi_pmic_arb_dev *dev, u8 sid, u16 addr,
>> + int (*offset)(struct spmi_pmic_arb *dev, u8 sid, u16 addr,
>> u32 *offset);
>> u32 (*fmt_cmd)(u8 opc, u8 sid, u16 addr, u8 bc);
>> int (*non_data_cmd)(struct spmi_controller *ctrl, u8 opc, u8 sid);
>> @@ -178,16 +178,16 @@ struct pmic_arb_ver_ops {
>> u32 (*irq_clear)(u8 n);
>> };
>>
>> -static inline void pmic_arb_base_write(struct spmi_pmic_arb_dev *dev,
>> +static inline void pmic_arb_base_write(struct spmi_pmic_arb *pa,
>> u32 offset, u32 val)
>> {
>> - writel_relaxed(val, dev->wr_base + offset);
>> + writel_relaxed(val, pa->wr_base + offset);
>
> "pa" is a little confusing with things like physical address and
> such. I would have gone for "arb", but the code is written
> already, so why change it now?
>
Ok. As per your suggestion we will drop this renaming patch.
>> }
>>
>> -static inline void pmic_arb_set_rd_cmd(struct spmi_pmic_arb_dev *dev,
>> +static inline void pmic_arb_set_rd_cmd(struct spmi_pmic_arb *pa,
>> u32 offset, u32 val)
>> {
>> - writel_relaxed(val, dev->rd_base + offset);
>> + writel_relaxed(val, pa->rd_base + offset);
>> }
>>
>> /**
>> @@ -196,9 +196,10 @@ static inline void pmic_arb_set_rd_cmd(struct
>> spmi_pmic_arb_dev *dev,
>> * @reg: register's address
>> * @buf: output parameter, length must be bc + 1
>> */
>> -static void pa_read_data(struct spmi_pmic_arb_dev *dev, u8 *buf, u32
>> reg, u8 bc)
>> +static void pa_read_data(struct spmi_pmic_arb *pa, u8 *buf, u32 reg,
>> u8 bc)
>
> In fact, I would rename these pa_{read,write}_data() functions as
> pmic_arb_{read,write}_data() to be consistent. These are the only
> places "pa_" is used right now.
>
Sure. Agree. Will rename this to pmic_arb_{read,write}_data in the next
patch.
>> {
>> - u32 data = __raw_readl(dev->rd_base + reg);
>> + u32 data = __raw_readl(pa->rd_base + reg);
>> +
>> memcpy(buf, &data, (bc & 3) + 1);
>> }
>>
>> @@ -209,23 +210,24 @@ static void pa_read_data(struct
>> spmi_pmic_arb_dev *dev, u8 *buf, u32 reg, u8 bc)
>> * @buf: buffer to write. length must be bc + 1.
>> */
>> static void
>> -pa_write_data(struct spmi_pmic_arb_dev *dev, const u8 *buf, u32 reg,
>> u8 bc)
>> +pa_write_data(struct spmi_pmic_arb *pa, const u8 *buf, u32 reg, u8
>> bc)
>> {
>> u32 data = 0;
>> +
>> memcpy(&data, buf, (bc & 3) + 1);
>> - __raw_writel(data, dev->wr_base + reg);
>> + pmic_arb_base_write(pa, reg, data);
>
> This is an unrelated change. Not sure what's going on with this
> diff but we most likely want to keep the __raw_writel() here. See
> how renames introduce bugs and why we don't value them?
>
Actually pmic_arb_base_write has the writel_relaxed inside it.
that's why we removed the __raw_writel to use the common function.
Anyways, we drop the renaming patch from this patch series.
>> }
>>
>> @@ -270,22 +272,22 @@ static int pmic_arb_wait_for_done(struct
>> spmi_controller *ctrl,
>> static int
>> pmic_arb_non_data_cmd_v1(struct spmi_controller *ctrl, u8 opc, u8
>> sid)
>> {
>> - struct spmi_pmic_arb_dev *pmic_arb =
>> spmi_controller_get_drvdata(ctrl);
>> + struct spmi_pmic_arb *pa = spmi_controller_get_drvdata(ctrl);
>> unsigned long flags;
>> u32 cmd;
>> int rc;
>> u32 offset;
>>
>> - rc = pmic_arb->ver_ops->offset(pmic_arb, sid, 0, &offset);
>> + rc = pa->ver_ops->offset(pa, sid, 0, &offset);
>> if (rc)
>> return rc;
>>
>> cmd = ((opc | 0x40) << 27) | ((sid & 0xf) << 20);
>>
>> - raw_spin_lock_irqsave(&pmic_arb->lock, flags);
>> - pmic_arb_base_write(pmic_arb, offset + PMIC_ARB_CMD, cmd);
>> - rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, 0);
>> - raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
>> + raw_spin_lock_irqsave(&pa->lock, flags);
>> + pmic_arb_base_write(pa, offset + PMIC_ARB_CMD, cmd);
>> + rc = pmic_arb_wait_for_done(ctrl, pa->wr_base, sid, 0);
>> + raw_spin_unlock_irqrestore(&pa->lock, flags);
>>
>> return rc;
>
> Yeah pmic_arb sounds fine too. Not sure why we changed anything
> in this function.
>
Ok. We will drop this renaming patch.
>> }
>> @@ -299,7 +301,7 @@ static int pmic_arb_wait_for_done(struct
>> spmi_controller *ctrl,
>> /* Non-data command */
>> static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
>> {
>> - struct spmi_pmic_arb_dev *pmic_arb =
>> spmi_controller_get_drvdata(ctrl);
>> + struct spmi_pmic_arb *pa = spmi_controller_get_drvdata(ctrl);
>>
>> dev_dbg(&ctrl->dev, "cmd op:0x%x sid:%d\n", opc, sid);
>>
>> @@ -307,13 +309,13 @@ static int pmic_arb_cmd(struct spmi_controller
>> *ctrl, u8 opc, u8 sid)
>> if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
>> return -EINVAL;
>>
>> - return pmic_arb->ver_ops->non_data_cmd(ctrl, opc, sid);
>> + return pa->ver_ops->non_data_cmd(ctrl, opc, sid);
>
> Same story...
>
Ok. We will drop this renaming patch.
>> }
>>
>> static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8
>> sid,
>> u16 addr, u8 *buf, size_t len)
>> {
>> - struct spmi_pmic_arb_dev *pmic_arb =
>> spmi_controller_get_drvdata(ctrl);
>> + struct spmi_pmic_arb *pa = spmi_controller_get_drvdata(ctrl);
>> unsigned long flags;
>> u8 bc = len - 1;
>> u32 cmd;
>> @@ -321,16 +323,16 @@ static int pmic_arb_read_cmd(struct
>> spmi_controller *ctrl, u8 opc, u8 sid,
>> u32 offset;
>> mode_t mode;
>>
>> - rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr, &offset);
>> + rc = pa->ver_ops->offset(pa, sid, addr, &offset);
>> if (rc)
>> return rc;
>>
>> - rc = pmic_arb->ver_ops->mode(pmic_arb, sid, addr, &mode);
>> + rc = pa->ver_ops->mode(pa, sid, addr, &mode);
>> if (rc)
>> return rc;
>>
>> if (!(mode & S_IRUSR)) {
>> - dev_err(&pmic_arb->spmic->dev,
>> + dev_err(&pa->spmic->dev,
>> "error: impermissible read from peripheral sid:%d addr:0x%x\n",
>> sid, addr);
>> return -EPERM;
>> @@ -353,30 +355,29 @@ static int pmic_arb_read_cmd(struct
>> spmi_controller *ctrl, u8 opc, u8 sid,
>> else
>> return -EINVAL;
>>
>> - cmd = pmic_arb->ver_ops->fmt_cmd(opc, sid, addr, bc);
>> + cmd = pa->ver_ops->fmt_cmd(opc, sid, addr, bc);
>>
>> - raw_spin_lock_irqsave(&pmic_arb->lock, flags);
>> - pmic_arb_set_rd_cmd(pmic_arb, offset + PMIC_ARB_CMD, cmd);
>> - rc = pmic_arb_wait_for_done(ctrl, pmic_arb->rd_base, sid, addr);
>> + raw_spin_lock_irqsave(&pa->lock, flags);
>> + pmic_arb_set_rd_cmd(pa, offset + PMIC_ARB_CMD, cmd);
>> + rc = pmic_arb_wait_for_done(ctrl, pa->rd_base, sid, addr);
>> if (rc)
>> goto done;
>>
>> - pa_read_data(pmic_arb, buf, offset + PMIC_ARB_RDATA0,
>> + pa_read_data(pa, buf, offset + PMIC_ARB_RDATA0,
>> min_t(u8, bc, 3));
>>
>> if (bc > 3)
>> - pa_read_data(pmic_arb, buf + 4,
>> - offset + PMIC_ARB_RDATA1, bc - 4);
>> + pa_read_data(pa, buf + 4, offset + PMIC_ARB_RDATA1, bc - 4);
>>
>> done:
>> - raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
>> + raw_spin_unlock_irqrestore(&pa->lock, flags);
>> return rc;
>> }
>>
>> static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc,
>> u8 sid,
>> u16 addr, const u8 *buf, size_t len)
>> {
>> - struct spmi_pmic_arb_dev *pmic_arb =
>> spmi_controller_get_drvdata(ctrl);
>> + struct spmi_pmic_arb *pa = spmi_controller_get_drvdata(ctrl);
>> unsigned long flags;
>> u8 bc = len - 1;
>> u32 cmd;
>> @@ -384,16 +385,16 @@ static int pmic_arb_write_cmd(struct
>> spmi_controller *ctrl, u8 opc, u8 sid,
>> u32 offset;
>> mode_t mode;
>>
>> - rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr, &offset);
>> + rc = pa->ver_ops->offset(pa, sid, addr, &offset);
>> if (rc)
>> return rc;
>>
>> - rc = pmic_arb->ver_ops->mode(pmic_arb, sid, addr, &mode);
>> + rc = pa->ver_ops->mode(pa, sid, addr, &mode);
>> if (rc)
>> return rc;
>>
>> if (!(mode & S_IWUSR)) {
>> - dev_err(&pmic_arb->spmic->dev,
>> + dev_err(&pa->spmic->dev,
>> "error: impermissible write to peripheral sid:%d addr:0x%x\n",
>> sid, addr);
>> return -EPERM;
>> @@ -418,20 +419,18 @@ static int pmic_arb_write_cmd(struct
>> spmi_controller *ctrl, u8 opc, u8 sid,
>> else
>> return -EINVAL;
>>
>> - cmd = pmic_arb->ver_ops->fmt_cmd(opc, sid, addr, bc);
>> + cmd = pa->ver_ops->fmt_cmd(opc, sid, addr, bc);
>>
>> /* Write data to FIFOs */
>> - raw_spin_lock_irqsave(&pmic_arb->lock, flags);
>> - pa_write_data(pmic_arb, buf, offset + PMIC_ARB_WDATA0,
>> - min_t(u8, bc, 3));
>> + raw_spin_lock_irqsave(&pa->lock, flags);
>> + pa_write_data(pa, buf, offset + PMIC_ARB_WDATA0, min_t(u8, bc, 3));
>> if (bc > 3)
>> - pa_write_data(pmic_arb, buf + 4,
>> - offset + PMIC_ARB_WDATA1, bc - 4);
>> + pa_write_data(pa, buf + 4, offset + PMIC_ARB_WDATA1, bc - 4);
>>
>> /* Start the transaction */
>> - pmic_arb_base_write(pmic_arb, offset + PMIC_ARB_CMD, cmd);
>> - rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, addr);
>> - raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
>> + pmic_arb_base_write(pa, offset + PMIC_ARB_CMD, cmd);
>> + rc = pmic_arb_wait_for_done(ctrl, pa->wr_base, sid, addr);
>> + raw_spin_unlock_irqrestore(&pa->lock, flags);
>>
>> return rc;
>> }
>
> Same story for all this diff.
Ok. We will drop this renaming patch.
>
>> @@ -457,7 +456,7 @@ struct spmi_pmic_arb_qpnpint_type {
>> static void qpnpint_spmi_write(struct irq_data *d, u8 reg, void *buf,
>> size_t len)
>> {
>> - struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
>> + struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>> u8 sid = d->hwirq >> 24;
>> u8 per = d->hwirq >> 16;
>>
>> @@ -470,7 +469,7 @@ static void qpnpint_spmi_write(struct irq_data *d,
>> u8 reg, void *buf,
>>
>> static void qpnpint_spmi_read(struct irq_data *d, u8 reg, void *buf,
>> size_t len)
>> {
>> - struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
>> + struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>> u8 sid = d->hwirq >> 24;
>> u8 per = d->hwirq >> 16;
>>
>> @@ -481,7 +480,7 @@ static void qpnpint_spmi_read(struct irq_data *d,
>> u8 reg, void *buf, size_t len)
>> d->irq);
>> }
>>
>> -static void periph_interrupt(struct spmi_pmic_arb_dev *pa, u8 apid)
>> +static void periph_interrupt(struct spmi_pmic_arb *pa, u8 apid)
>> {
>> unsigned int irq;
>> u32 status;
>> @@ -490,7 +489,7 @@ static void periph_interrupt(struct
>> spmi_pmic_arb_dev *pa, u8 apid)
>> status = readl_relaxed(pa->intr + pa->ver_ops->irq_status(apid));
>> while (status) {
>> id = ffs(status) - 1;
>> - status &= ~(1 << id);
>> + status &= ~BIT(id);
>> irq = irq_find_mapping(pa->domain,
>> pa->apid_to_ppid[apid] << 16
>> | id << 8
>> @@ -501,7 +500,7 @@ static void periph_interrupt(struct
>> spmi_pmic_arb_dev *pa, u8 apid)
>>
>> static void pmic_arb_chained_irq(struct irq_desc *desc)
>> {
>> - struct spmi_pmic_arb_dev *pa = irq_desc_get_handler_data(desc);
>> + struct spmi_pmic_arb *pa = irq_desc_get_handler_data(desc);
>> struct irq_chip *chip = irq_desc_get_chip(desc);
>> void __iomem *intr = pa->intr;
>> int first = pa->min_apid >> 5;
>> @@ -516,7 +515,7 @@ static void pmic_arb_chained_irq(struct irq_desc
>> *desc)
>> pa->ver_ops->owner_acc_status(pa->ee, i));
>> while (status) {
>> id = ffs(status) - 1;
>> - status &= ~(1 << id);
>> + status &= ~BIT(id);
>> periph_interrupt(pa, id + i * 32);
>> }
>> }
>> @@ -526,23 +525,23 @@ static void pmic_arb_chained_irq(struct irq_desc
>> *desc)
>>
>> static void qpnpint_irq_ack(struct irq_data *d)
>> {
>> - struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
>> + struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>> u8 irq = d->hwirq >> 8;
>> u8 apid = d->hwirq;
>> unsigned long flags;
>> u8 data;
>>
>> raw_spin_lock_irqsave(&pa->lock, flags);
>> - writel_relaxed(1 << irq, pa->intr + pa->ver_ops->irq_clear(apid));
>> + writel_relaxed(BIT(irq), pa->intr + pa->ver_ops->irq_clear(apid));
>> raw_spin_unlock_irqrestore(&pa->lock, flags);
>>
>> - data = 1 << irq;
>> + data = BIT(irq);
>> qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &data, 1);
>> }
>>
>> static void qpnpint_irq_mask(struct irq_data *d)
>> {
>> - struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
>> + struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>> u8 irq = d->hwirq >> 8;
>> u8 apid = d->hwirq;
>> unsigned long flags;
>> @@ -558,13 +557,13 @@ static void qpnpint_irq_mask(struct irq_data *d)
>> }
>> raw_spin_unlock_irqrestore(&pa->lock, flags);
>>
>> - data = 1 << irq;
>> + data = BIT(irq);
>> qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &data, 1);
>> }
>>
>> static void qpnpint_irq_unmask(struct irq_data *d)
>> {
>> - struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
>> + struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>> u8 irq = d->hwirq >> 8;
>> u8 apid = d->hwirq;
>> unsigned long flags;
>> @@ -579,7 +578,7 @@ static void qpnpint_irq_unmask(struct irq_data *d)
>> }
>> raw_spin_unlock_irqrestore(&pa->lock, flags);
>>
>> - data = 1 << irq;
>> + data = BIT(irq);
>> qpnpint_spmi_write(d, QPNPINT_REG_EN_SET, &data, 1);
>> }
>>
>> @@ -590,7 +589,7 @@ static void qpnpint_irq_enable(struct irq_data *d)
>>
>> qpnpint_irq_unmask(d);
>>
>> - data = 1 << irq;
>> + data = BIT(irq);
>> qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &data, 1);
>> }
>>
>> @@ -598,25 +597,26 @@ static int qpnpint_irq_set_type(struct irq_data
>> *d, unsigned int flow_type)
>> {
>> struct spmi_pmic_arb_qpnpint_type type;
>> u8 irq = d->hwirq >> 8;
>> + u8 bit_mask_irq = BIT(irq);
>
> Why the local variable? Just do the ~BIT(irq) thing in place and
> let the compiler take care of the hoist?
>
Sure.. we will remove this local variable in the subsequent patch.
>>
>> qpnpint_spmi_read(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type));
>>
>> if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
>> - type.type |= 1 << irq;
>> + type.type |= bit_mask_irq;
>> if (flow_type & IRQF_TRIGGER_RISING)
>> - type.polarity_high |= 1 << irq;
>> + type.polarity_high |= bit_mask_irq;
>> if (flow_type & IRQF_TRIGGER_FALLING)
>> - type.polarity_low |= 1 << irq;
>> + type.polarity_low |= bit_mask_irq;
>> } else {
>> if ((flow_type & (IRQF_TRIGGER_HIGH)) &&
>> (flow_type & (IRQF_TRIGGER_LOW)))
>> return -EINVAL;
>>
>> - type.type &= ~(1 << irq); /* level trig */
>> + type.type &= ~bit_mask_irq; /* level trig */
>> if (flow_type & IRQF_TRIGGER_HIGH)
>> - type.polarity_high |= 1 << irq;
>> + type.polarity_high |= bit_mask_irq;
>> else
>> - type.polarity_low |= 1 << irq;
>> + type.polarity_low |= bit_mask_irq;
>> }
>>
>> qpnpint_spmi_write(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type));
>> @@ -657,7 +657,7 @@ struct spmi_pmic_arb_irq_spec {
>
> Overall I see little to no value with this patch. I suggest you
> drop the rename. The BIT() thing may be ok, but again, not sure
> there's any benefit.
Ok.. Sure. We drop out the renaming patch in the next version
and will have only BIT() macro patch.

\
 
 \ /
  Last update: 2017-06-01 18:12    [W:2.332 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site