lkml.org 
[lkml]   [2017]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: Oops with commit 6d18c73 bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
On Thu, Jun 1, 2017 at 12:32 AM, Sebastian Ott
<sebott@linux.vnet.ibm.com> wrote:
[...]
>
> A system running v4.12-rc3-11-gf511c0b on s390 hangs after boot with no
> messages on the console. The message buffer obtained via a system dump
> looked like this:
>
> [...]
> [ 17.870712] virbr0: port 1(virbr0-nic) entered disabled state
> [ 19.618523] Unable to handle kernel pointer dereference in virtual kernel address space
> [ 250.028426] INFO: task jbd2/dasda1-8:100 blocked for more than 120 seconds.
> [ 250.028427] Not tainted 4.12.0-rc3-00011-gf511c0b #573
> [ 250.028428] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 250.028429] jbd2/dasda1-8 D12808 100 2 0x00000000
> [ 250.028437] Stack:
> [ 250.028437] 00000000e8c4f9b0 0000000000000000 0000000000233afe 00000000e8c48100
> [ 250.028441] 00000000e8c4f978 00000000001b1c98 00000000e8c4f978 00000000e8c4f9d8
> [ 250.028444] 04000000efdcce00 00000000e8c48890 0000000000000000 00000000efdcce18
> [ 250.028447] 00000000e8c48100 00000000efdcce00 00000000e8ce8100 00000000e73c6900
> [ 250.028450] 00000000008da090 00000000008c4f54 00000000e8c4f9d8 00000000e8c4fa60
> [ 250.028453] Call Trace:
> [ 250.028458] ([<00000000008c4f54>] __schedule+0xb14/0xc90)
> [ 250.028459] [<00000000008c5164>] schedule+0x94/0xc0
> [ 250.028462] [<00000000001802ac>] io_schedule+0x34/0x58
> [ 250.028464] [<00000000002a44c2>] wait_on_page_bit+0x16a/0x198
> [ 250.028465] [<00000000002a4576>] __filemap_fdatawait_range+0x86/0x188
> [ 250.028467] [<00000000002a46a6>] filemap_fdatawait_range+0x2e/0x58
> [ 250.028471] [<00000000004719d4>] jbd2_journal_commit_transaction+0x10e4/0x2200
> [ 250.028473] [<000000000047890a>] kjournald2+0xda/0x2c0
> [ 250.028475] [<000000000016da5e>] kthread+0x166/0x178
> [ 250.028477] [<00000000008cce7a>] kernel_thread_starter+0x6/0xc
> [ 250.028479] [<00000000008cce74>] kernel_thread_starter+0x0/0xc
> [ 250.028480] INFO: lockdep is turned off.
> [...]
I couldn't see any bridge-related thing here, and it couldn't be reproduced
with virbr0 (stp=1) on my box (on both s390x and x86_64), I guess there
is something else in you machine.

With the latest upstream kernel, can you remove libvirt (virbr0) and boot your
machine normally, then:
# brctl addbr br0
# ip link set br0 up
# brctl stp br0 on

to check if it will still hang.

If it can't be reproduced in this way, pls add this on your kernel:

--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -178,9 +178,11 @@ static void br_stp_start(struct net_bridge *br)
br->stp_enabled = BR_KERNEL_STP;
br_debug(br, "using kernel STP\n");

+ WARN_ON(1);
/* To start timers on any ports left in blocking */
mod_timer(&br->hello_timer, jiffies + br->hello_time);
br_port_state_selection(br);
+ pr_warn("hello timer start done\n");
}

spin_unlock_bh(&br->lock);
diff --git a/net/bridge/br_stp_timer.c b/net/bridge/br_stp_timer.c
index 60b6fe2..c98b3e5 100644
--- a/net/bridge/br_stp_timer.c
+++ b/net/bridge/br_stp_timer.c
@@ -40,7 +40,7 @@ static void br_hello_timer_expired(unsigned long arg)
if (br->dev->flags & IFF_UP) {
br_config_bpdu_generation(br);

- if (br->stp_enabled == BR_KERNEL_STP)
+ if (br->stp_enabled != BR_USER_STP)
mod_timer(&br->hello_timer,
round_jiffies(jiffies + br->hello_time));

let's see if it hangs when starting the timer. Thanks.

\
 
 \ /
  Last update: 2017-06-01 09:43    [W:0.059 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site