lkml.org 
[lkml]   [2017]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/7] staging: typec: fusb302: Fix chip->vbus_present init value
Date
From: Yueyao Zhu <yueyao.zhu@gmail.com>

FUSB_REG_STATUS0 & FUSB_REG_STATUS0_VBUSOK = 0x40 & 0x80 is always
zero. Fix the code to what it is intended to be: check the VBUSOK
bit of the value read from address FUSB_REG_STATUS0.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Yueyao Zhu <yueyao.zhu@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/staging/typec/fusb302/fusb302.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
index aa460f93a293..d8b50b49bb2d 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -489,7 +489,7 @@ static int tcpm_init(struct tcpc_dev *dev)
ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data);
if (ret < 0)
return ret;
- chip->vbus_present = !!(FUSB_REG_STATUS0 & FUSB_REG_STATUS0_VBUSOK);
+ chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK);
ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data);
if (ret < 0)
return ret;
--
2.7.4
\
 
 \ /
  Last update: 2017-05-10 21:18    [W:0.106 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site