Messages in this thread Patch in this message | | | From | Kieran Bingham <> | Subject | [PATCHv1.1] Documentation: of: Fix grammar usage in graph bindings | Date | Mon, 8 May 2017 11:34:25 +0100 |
| |
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Some minor tweaks to the language and formatting used in the documentation identified while I was reading up on the subject matter.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> ---
Appologies for the resend. 'usage' was mis-spelled in my previous commit title :-(
Documentation/devicetree/bindings/graph.txt | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/graph.txt b/Documentation/devicetree/bindings/graph.txt index fcb1c6a4787b..0415e2c53ba0 100644 --- a/Documentation/devicetree/bindings/graph.txt +++ b/Documentation/devicetree/bindings/graph.txt @@ -34,7 +34,7 @@ remote device, an 'endpoint' child node must be provided for each link. If more than one port is present in a device node or there is more than one endpoint at a port, or a port node needs to be associated with a selected hardware interface, a common scheme using '#address-cells', '#size-cells' -and 'reg' properties is used number the nodes. +and 'reg' properties is used to number the nodes. device { ... @@ -89,9 +89,9 @@ Links between endpoints Each endpoint should contain a 'remote-endpoint' phandle property that points to the corresponding endpoint in the port of the remote device. In turn, the -remote endpoint should contain a 'remote-endpoint' property. If it has one, -it must not point to another than the local endpoint. Two endpoints with their -'remote-endpoint' phandles pointing at each other form a link between the +remote endpoint should contain a 'remote-endpoint' property. If it has one, it +must not point to anything other than the local endpoint. Two endpoints with +their 'remote-endpoint' phandles pointing at each other form a link between the containing ports. device-1 { @@ -110,13 +110,12 @@ device-2 { }; }; - Required properties ------------------- If there is more than one 'port' or more than one 'endpoint' node or 'reg' -property is present in port and/or endpoint nodes the following properties -are required in a relevant parent node: +property present in the port and/or endpoint nodes then the following +properties are required in a relevant parent node: - #address-cells : number of cells required to define port/endpoint identifier, should be 1. -- 2.7.4
| |