lkml.org 
[lkml]   [2017]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v6 03/13] dt-bindings: add bindings for DE2 on V3s SoC
On Thu, May 4, 2017 at 7:48 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
> Allwinner V3s SoC have a display engine which have a different pipeline
> with older SoCs.
>
> Add document for it (new compatibles and the new "mixer" part).
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Changes in v4:
> - Removed the refactor at TCON chapter.
> Changes in v3:
> - Remove the description of having a BE directly as allwinner,pipeline.
>
> .../bindings/display/sunxi/sun4i-drm.txt | 29 ++++++++++++++++++++--
> 1 file changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> index 7acdbf14ae1c..33452884b96e 100644
> --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> @@ -41,6 +41,7 @@ Required properties:
> * allwinner,sun6i-a31-tcon
> * allwinner,sun6i-a31s-tcon
> * allwinner,sun8i-a33-tcon
> + * allwinner,sun8i-v3s-tcon
> - reg: base address and size of memory-mapped region
> - interrupts: interrupt associated to this IP
> - clocks: phandles to the clocks feeding the TCON. Three are needed:
> @@ -62,7 +63,7 @@ Required properties:
> second the block connected to the TCON channel 1 (usually the TV
> encoder)
>
> -On SoCs other than the A33, there is one more clock required:
> +On SoCs other than the A33 and V3s, there is one more clock required:
> - 'tcon-ch1': The clock driving the TCON channel 1
>
> DRC
> @@ -148,6 +149,26 @@ Required properties:
> Documentation/devicetree/bindings/media/video-interfaces.txt. The
> first port should be the input endpoints, the second one the outputs
>
> +Display Engine 2.0 Mixer
> +------------------------
> +
> +The DE2 mixer have many functionalities, currently only layer blending is
> +supported.
> +
> +Required properties:
> + - compatible: value must be one of:
> + * allwinner,sun8i-v3s-de2-mixer
> + - reg: base address and size of the memory-mapped region.
> + - clocks: phandles to the clocks feeding the frontend and backend
> + * bus: the backend interface clock
> + * ram: the backend DRAM clock

You probably mean "mixer" here.

> + - clock-names: the clock names mentioned above
> + - resets: phandles to the reset controllers driving the backend

And here.

> +
> +- ports: A ports node with endpoint definitions as defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt. The
> + first port should be the input endpoints, the second one the output
> +
>
> Display Engine Pipeline
> -----------------------
> @@ -162,9 +183,13 @@ Required properties:
> * allwinner,sun6i-a31-display-engine
> * allwinner,sun6i-a31s-display-engine
> * allwinner,sun8i-a33-display-engine
> + * allwinner,sun8i-v3s-display-engine
>
> - allwinner,pipelines: list of phandle to the display engine
> - frontends available.
> + pipeline entry point. For SoCs with original DE (currently
> + all SoCs supported by display engine except V3s), this
> + phandle should be a display frontend; for SoCs with DE2,
> + this phandle should be a mixer.

You could simplify this to "list of phandles to the display
engine frontends (DE 1.0) or mixers (DE 2.0) available".

Regards
ChenYu

>
> Example:
>
> --
> 2.12.2
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

\
 
 \ /
  Last update: 2017-05-05 05:25    [W:0.189 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site