lkml.org 
[lkml]   [2017]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 1/6] ARM: imx6q: provide documentation for new fsl,pmic_stby_poweroff property
    Date
    Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
    Cc: kernel@pengutronix.de
    Cc: linux-arm-kernel@lists.infradead.org
    Cc: Michael Turquette <mturquette@baylibre.com>
    Cc: Stephen Boyd <sboyd@codeaurora.org>
    Cc: Rob Herring <robh+dt@kernel.org>
    Cc: Mark Rutland <mark.rutland@arm.com>
    Cc: linux-clk@vger.kernel.org
    Cc: devicetree@vger.kernel.org
    Cc: linux-kernel@vger.kernel.org
    ---
    Documentation/devicetree/bindings/clock/imx6q-clock.txt | 4 ++++
    1 file changed, 4 insertions(+)

    diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
    index 9252912a5b0e..214cb5f461c7 100644
    --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
    +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
    @@ -6,6 +6,10 @@ Required properties:
    - interrupts: Should contain CCM interrupt
    - #clock-cells: Should be <1>

    +Optional properties:
    +- fsl,pmic_stby_poweroff: Configure CCM to assert PMIC_STBY_REQ signal
    + on power off.
    +
    The clock consumer should specify the desired clock by having the clock
    ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
    for the full list of i.MX6 Quad and DualLite clock IDs.
    --
    2.11.0
    \
     
     \ /
      Last update: 2017-05-31 08:16    [W:5.036 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site