lkml.org 
[lkml]   [2017]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] i2c: mxs: change error printing to debug for mxs_i2c_pio_wait_xfer_end
Date
Instead of printing errors after mxs_i2c_pio_wait_xfer_end returns with
an error code just print a debug message.

NAKs and timeouts can occur in this situation normally, so do not treat
them as errors.

Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
---
drivers/i2c/busses/i2c-mxs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 5738556..d4e8f19 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -419,7 +419,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,

ret = mxs_i2c_pio_wait_xfer_end(i2c);
if (ret) {
- dev_err(i2c->dev,
+ dev_dbg(i2c->dev,
"PIO: Failed to send SELECT command!\n");
goto cleanup;
}
@@ -431,7 +431,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,

ret = mxs_i2c_pio_wait_xfer_end(i2c);
if (ret) {
- dev_err(i2c->dev,
+ dev_dbg(i2c->dev,
"PIO: Failed to send READ command!\n");
goto cleanup;
}
@@ -528,7 +528,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
/* Wait for the end of the transfer. */
ret = mxs_i2c_pio_wait_xfer_end(i2c);
if (ret) {
- dev_err(i2c->dev,
+ dev_dbg(i2c->dev,
"PIO: Failed to finish WRITE cmd!\n");
break;
}
--
2.9.2
\
 
 \ /
  Last update: 2017-05-31 11:42    [W:0.113 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site