lkml.org 
[lkml]   [2017]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/9] usb: musb: tusb6010_omap: Convert to DMAengine
On Thu, May 18, 2017 at 04:11:58PM +0300, Peter Ujfalusi wrote:
> Hi,
>
> Changes since v3:
> - typos in commit message of patch 3 and 5 fixed
> - long line fixed in patch 5
> - Ack from Vinod is added to the first patch
> - The series depends on: http://marc.info/?l=linux-omap&m=149459699415599&w=2
>
> Changes since v2:
> - patch 5 from the v1 has been sent separately
> (usb: musb: tusb6010_omap: Do not reset the other direction's packet size)
> - Added Tested-by from Tony.
>
> Changes since v1:
> - Fix the port_window support in omap-dma DMAengine driver
> - MUSB_G_NO_SKB_RESERVE quirk flag addition to msub core
> - packet size corruption fix for tusb6010
> - Handle DMA completion for TX also in the DMA callback
>
> The v1 series was tested with g_cdc where only the DMA was only enabled for TX
> and because of that I have not noticed that the sDMA code was not correct for RX,
> it only worked for TX case.
>
> The ASYNC mode of tusb6010 is really unstable, we get corrupted TX/RX offset
> register quite easily, but the SYNC mode is stable.
>
> The series was tested on top of next-20170510 with g_ncm module since with this
> we can use the quirk to avoid skb_reserve and get properly aligned buffers for
> DMA.
> The n810 is using nfsroot.
>
> The device would not boot to prompt most of the time before patch 5 (packet size
> reset fix).
> With that patch in, the device would boot up fine most of the cases, but will
> fail pretty fast with my stress test [1].
> After the first 9 patch the legacy DMA mode is going to be stable with g_ncm, it
> boots to prompt, and survives the stress test [1].
>
> The last patch is going the DMAengine conversion and I have run the stress test
> against it over 3 hours (ping-test.sh wrap count is 139).
>
> [1] Running these in parallel:
> ping -f 192.168.0.2
> ping -f -s 2048 192.168.0.2
> ping-test.sh 192.168.0.2 1
>
> and (nfsroot) time to time:
> scp root@192.168.0.1:/usr/portage/distfiles/thunderbird-52.1.0.source.tar.xz /
>
> $ ls -alh /usr/portage/distfiles/thunderbird-52.1.0.source.tar.xz
> 218M Apr 30 15:46 /usr/portage/distfiles/thunderbird-52.1.0.source.tar.xz
>
> In essence copy 218M from my host back to the host.
>
> ping-test.sh (modified version from Tony to show the wrap count):
> #!/bin/bash
>
> device=$1
> size=$2
> wraps=0
>
> while [ 1 ]; do
> #echo "Pinging with size $size"
> if ! ping -w0 -c1 -s$size $device > /dev/null 2>&1; then
> break;
> fi
> size=$(expr $size + 1)
>
> if [ $size -gt 8192 ]; then
> wraps=$(expr $wraps + 1)
> echo "wrapping ($wraps) at $size"
> size=1
> fi
> done
> echo "Test ran up to $size"
>
> Regards,
> Peter
>
> CC: dmaengine@vger.kernel.org
> I only send the cover letter and the DMAengine patch for the dmaengine list, the
> rest can be checked - if there is interest - via lkml
> ---
> Peter Ujfalusi (9):
> dmaengine: omap-dma: port_window support correction for both direction
> usb: musb: Add quirk to avoid skb reserve in gadget mode
> usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
> usb: musb: tusb6010_omap: Use one musb_ep_select call in
> tusb_omap_dma_program
> usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
> usb: musb: tusb6010_omap: Allocate DMA channels upfront
> usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
> ARM: OMAP2+: DMA: Add slave map entries for 24xx external request
> lines
> usb: musb: tusb6010_omap: Convert to DMAengine API
>
> arch/arm/mach-omap2/dma.c | 24 +++
> drivers/dma/omap-dma.c | 39 ++--
> drivers/usb/musb/musb_core.c | 3 +
> drivers/usb/musb/musb_core.h | 1 +
> drivers/usb/musb/tusb6010.c | 21 +--
> drivers/usb/musb/tusb6010_omap.c | 379 ++++++++++++++++-----------------------
> 6 files changed, 203 insertions(+), 264 deletions(-)
>

Applied. Thanks.
-Bin.

\
 
 \ /
  Last update: 2017-05-30 17:53    [W:0.183 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site