lkml.org 
[lkml]   [2017]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/4] dt-bindings: power: supply: add battery charge voltage/current
Hi Enric,

On Fri, May 26, 2017 at 4:04 AM, Enric Balletbo i Serra
<enric.balletbo@collabora.com> wrote:
> Add charging voltage and current characteristics to the battery DT for
> proper handling of the battery by fuel-gauge and charger chips.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> Changes since v2:
> - Requested by Sebastian Reichel
> - Move to its own patch and apply to simple-battery framework.
> Changes since v1:
> - Requested by Rob Herring
> - Rename ti,charge-* to charge-* to be standard properties.
> - Use unit suffixes as per bindings/property-units.txt
>
> Documentation/devicetree/bindings/power/supply/battery.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt
> index 63a7028..c87a439 100644
> --- a/Documentation/devicetree/bindings/power/supply/battery.txt
> +++ b/Documentation/devicetree/bindings/power/supply/battery.txt
> @@ -12,6 +12,8 @@ Optional Properties:
> - voltage-min-design-microvolt: drained battery voltage
> - energy-full-design-microwatt-hours: battery design energy
> - charge-full-design-microamp-hours: battery design capacity
> + - charge-voltage-microvolt: battery charging voltage
> + - charge-current-microamp: battery charging current

I think you mean constant-charge-* which is how you surface these
properties in your tps65217_charger patch.

I'll add these to v14 of my patchset which adds simple-battery
support. Rob requested a single patch for this file.

I've been waiting for feedback on v13.2 from Sebastian. If I don't
hear from him within a few days, I'll post v14.

> Batteries must be referenced by chargers and/or fuel-gauges
> using a phandle. The phandle's property should be named
> @@ -24,6 +26,8 @@ Example:
> voltage-min-design-microvolt = <3200000>;
> energy-full-design-microwatt-hours = <5290000>;
> charge-full-design-microamp-hours = <1430000>;
> + charge-voltage-microvolt = <4100000>;
> + charge-current-microamp = <300000>;
> };
>
> charger: charger@11 {
> --
> 2.9.3
>

\
 
 \ /
  Last update: 2017-05-27 03:33    [W:2.978 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site