lkml.org 
[lkml]   [2017]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 0/8] i2c: refactor core and break out blocks
Date
On Fri, 26 May 2017, Wolfram Sang <wsa@the-dreams.de> wrote:
> Yes, I wanted to do this for years now... The I2C core became a huge monolithic
> blob getting harder and harder to maintain. This series breaks out some
> functional parts into seperate files. This makes the code easier to handle
> because of the smaller chunks. It reduces ifdeffery because we can now handle
> compilation at the Makefile level. And it helps to spread responsibility, e.g.
> the ACPI maintainers do now have a dedicated file listed in MAINTAINERS.
>
> This series was tested with a Renesas Lager board (R-Car H2 SoC). It booted
> normally and all device drivers for I2C clients seem to work normally. I wired
> two I2C busses together and used i2c-slave-eeprom to let one I2C IP core read
> out data from the other. That all worked fine. Buildbot is also happy, it found
> two issues of the first (non public) iteration. Thanks!
>
> I did not test ACPI and hope for some assistance here :) I'd also be happy if
> people could check the includes of the newly created files, there might be
> missing some.

If you don't mind sending the whole series to the intel-gfx list (Cc'd),
our CI will run a bunch of tests on it, exercising our use of the I2C
adapter interfaces for display data channel and I2C over Display Port
native aux.

BR,
Jani.

--
Jani Nikula, Intel Open Source Technology Center

\
 
 \ /
  Last update: 2017-05-26 13:55    [W:0.176 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site