lkml.org 
[lkml]   [2017]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] RFC: arm: eBPF JIT compiler
Hi,

On Wed, May 24, 2017 at 12:03:53AM +0530, Shubham Bansal wrote:
> The JIT compiler emits ARM 32 bit instructions. Currently, It supports
> eBPF only. Classic BPF is supported because of the conversion by BPF
> core.
>
> JIT is enabled with
>
> echo 1 > /proc/sys/net/core/bpf_jit_enable
>
> Constant Blinding can be enabled along with JIT using
>
> echo 1 > /proc/sys/net/core/bpf_jit_enable
> echo 2 > /proc/sys/net/core/bpf_jit_harden
>
> See Documentation/networking/filter.txt for more information.
> Tested on ARMv7 with CONFIG_FRAME_POINTER enabled.

What is this patch actually doing?

The commit message doesn't describe what changes this patch is doing,
and it needs to. Presumably, it's adding support for eBPF?

If that's so, doesn't it need to change us from selecting HAVE_CBPF_JIT
to selecting HAVE_EBPF_JIT ?

What about cases where the frame pointer is not enabled? If that's
not supported then shouldn't the Kconfig be adjusted? What about
users who are using cBPF without the frame pointer enabled?

I haven't been able to go through the patch analysing it fully, but
what I have read doesn't give me any immediate concerns. Only one
spelling mistake stood out.

Some things that I'm wondering though - what about endian issues?
LDRD, for example, takes two registers, in ARM mode, these registers
must be an even-odd pair. The even register is loaded from at the
lowest address, the odd register from the higher address. This means
when loading a BE value, the most significant word is in the even
numbered register and the least significant word is in the odd numbered
register. For LE values, the even numbered register contains the least
significant word. Are we properly handling issues like this in all
places?

> +static const u8 bpf2a32[][2] = {
> + /* return value from in-kernel function, and exit value from eBPF */
> + [BPF_REG_0] = {ARM_R1, ARM_R0},
> + /* arguments from eBPF program to in-kernel function */
> + [BPF_REG_1] = {ARM_R3, ARM_R2},
> + /* Stored on stack scratch space */
> + [BPF_REG_2] = {STACK_OFFSET(0), STACK_OFFSET(4)},
> + [BPF_REG_3] = {STACK_OFFSET(8), STACK_OFFSET(12)},
> + [BPF_REG_4] = {STACK_OFFSET(16), STACK_OFFSET(20)},
> + [BPF_REG_5] = {STACK_OFFSET(24), STACK_OFFSET(28)},
> + /* callee saved registers that in-kernel function will preserve */
> + [BPF_REG_6] = {ARM_R5, ARM_R4},
> + /* Stored on stack scratch space */
> + [BPF_REG_7] = {STACK_OFFSET(32), STACK_OFFSET(36)},
> + [BPF_REG_8] = {STACK_OFFSET(40), STACK_OFFSET(44)},
> + [BPF_REG_9] = {STACK_OFFSET(48), STACK_OFFSET(52)},
> + /* Read only Frame Pointer to access Stack */
> + [BPF_REG_FP] = {STACK_OFFSET(56), STACK_OFFSET(60)},
> + /* Temperory Register for internal BPF JIT, can be used

"Temporary"

\
 
 \ /
  Last update: 2017-05-23 21:02    [W:0.094 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site