lkml.org 
[lkml]   [2017]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 6/6] spi: slave: Add SPI slave handler controlling system state
On Mon, May 22, 2017 at 4:11 PM, Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
> Add an example SPI slave handler to allow remote control of system
> reboot, power off, halt, and suspend.
>

FWIW:
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v5:
> - Add usage documentation to file header,
> - Use network byte order for commands, to match the "-p" parameter of
> spidev_test,
> - Replace pr_*() by dev_*(), stop printing __func__,
> - Remove spi_setup() call to configure 8 bits per word, as that's the
> default,
>
> v3, v4:
> - No changes,
>
> v2:
> - Use spi_async() instead of spi_read(),
> - Submit the next transfer from the previous transfer's completion
> callback, removing the need for a thread,
> - Let .remove() call spi_slave_abort() to cancel the current ongoing
> transfer, and wait for the completion to terminate,
> - Remove FIXME about hanging kthread_stop(),
> - Fix copy-and-pasted module description.
> ---
> drivers/spi/Kconfig | 6 ++
> drivers/spi/Makefile | 1 +
> drivers/spi/spi-slave-system-control.c | 154 +++++++++++++++++++++++++++++++++
> 3 files changed, 161 insertions(+)
> create mode 100644 drivers/spi/spi-slave-system-control.c
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 9972ee2a8454a2fc..82cd818aa06293f5 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -803,6 +803,12 @@ config SPI_SLAVE_TIME
> SPI slave handler responding with the time of reception of the last
> SPI message.
>
> +config SPI_SLAVE_SYSTEM_CONTROL
> + tristate "SPI slave handler controlling system state"
> + help
> + SPI slave handler to allow remote control of system reboot, power
> + off, halt, and suspend.
> +
> endif # SPI_SLAVE
>
> endif # SPI
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index fb078693dbe40da4..1d7923e8c63bc22b 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -108,3 +108,4 @@ obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
>
> # SPI slave protocol handlers
> obj-$(CONFIG_SPI_SLAVE_TIME) += spi-slave-time.o
> +obj-$(CONFIG_SPI_SLAVE_SYSTEM_CONTROL) += spi-slave-system-control.o
> diff --git a/drivers/spi/spi-slave-system-control.c b/drivers/spi/spi-slave-system-control.c
> new file mode 100644
> index 0000000000000000..c0257e937995ec53
> --- /dev/null
> +++ b/drivers/spi/spi-slave-system-control.c
> @@ -0,0 +1,154 @@
> +/*
> + * SPI slave handler controlling system state
> + *
> + * This SPI slave handler allows remote control of system reboot, power off,
> + * halt, and suspend.
> + *
> + * Copyright (C) 2016-2017 Glider bvba
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Usage (assuming /dev/spidev2.0 corresponds to the SPI master on the remote
> + * system):
> + *
> + * # reboot='\x7c\x50'
> + * # poweroff='\x71\x3f'
> + * # halt='\x38\x76'
> + * # suspend='\x1b\x1b'
> + * # spidev_test -D /dev/spidev2.0 -p $suspend # or $reboot, $poweroff, $halt
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/module.h>
> +#include <linux/reboot.h>
> +#include <linux/suspend.h>
> +#include <linux/spi/spi.h>
> +
> +/*
> + * The numbers are chosen to display something human-readable on two 7-segment
> + * displays connected to two 74HC595 shift registers
> + */
> +#define CMD_REBOOT 0x7c50 /* rb */
> +#define CMD_POWEROFF 0x713f /* OF */
> +#define CMD_HALT 0x3876 /* HL */
> +#define CMD_SUSPEND 0x1b1b /* ZZ */
> +
> +struct spi_slave_system_control_priv {
> + struct spi_device *spi;
> + struct completion finished;
> + struct spi_transfer xfer;
> + struct spi_message msg;
> + __be16 cmd;
> +};
> +
> +static
> +int spi_slave_system_control_submit(struct spi_slave_system_control_priv *priv);
> +
> +static void spi_slave_system_control_complete(void *arg)
> +{
> + struct spi_slave_system_control_priv *priv = arg;
> + u16 cmd;
> + int ret;
> +
> + if (priv->msg.status)
> + goto terminate;
> +
> + cmd = be16_to_cpu(priv->cmd);
> + switch (cmd) {
> + case CMD_REBOOT:
> + dev_info(&priv->spi->dev, "Rebooting system...\n");
> + kernel_restart(NULL);
> +
> + case CMD_POWEROFF:
> + dev_info(&priv->spi->dev, "Powering off system...\n");
> + kernel_power_off();
> + break;
> +
> + case CMD_HALT:
> + dev_info(&priv->spi->dev, "Halting system...\n");
> + kernel_halt();
> + break;
> +
> + case CMD_SUSPEND:
> + dev_info(&priv->spi->dev, "Suspending system...\n");
> + pm_suspend(PM_SUSPEND_MEM);
> + break;
> +
> + default:
> + dev_warn(&priv->spi->dev, "Unknown command 0x%x\n", cmd);
> + break;
> + }
> +
> + ret = spi_slave_system_control_submit(priv);
> + if (ret)
> + goto terminate;
> +
> + return;
> +
> +terminate:
> + dev_info(&priv->spi->dev, "Terminating\n");
> + complete(&priv->finished);
> +}
> +
> +static
> +int spi_slave_system_control_submit(struct spi_slave_system_control_priv *priv)
> +{
> + int ret;
> +
> + spi_message_init_with_transfers(&priv->msg, &priv->xfer, 1);
> +
> + priv->msg.complete = spi_slave_system_control_complete;
> + priv->msg.context = priv;
> +
> + ret = spi_async(priv->spi, &priv->msg);
> + if (ret)
> + dev_err(&priv->spi->dev, "spi_async() failed %d\n", ret);
> +
> + return ret;
> +}
> +
> +static int spi_slave_system_control_probe(struct spi_device *spi)
> +{
> + struct spi_slave_system_control_priv *priv;
> + int ret;
> +
> + priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->spi = spi;
> + init_completion(&priv->finished);
> + priv->xfer.rx_buf = &priv->cmd;
> + priv->xfer.len = sizeof(priv->cmd);
> +
> + ret = spi_slave_system_control_submit(priv);
> + if (ret)
> + return ret;
> +
> + spi_set_drvdata(spi, priv);
> + return 0;
> +}
> +
> +static int spi_slave_system_control_remove(struct spi_device *spi)
> +{
> + struct spi_slave_system_control_priv *priv = spi_get_drvdata(spi);
> +
> + spi_slave_abort(spi);
> + wait_for_completion(&priv->finished);
> + return 0;
> +}
> +
> +static struct spi_driver spi_slave_system_control_driver = {
> + .driver = {
> + .name = "spi-slave-system-control",
> + },
> + .probe = spi_slave_system_control_probe,
> + .remove = spi_slave_system_control_remove,
> +};
> +module_spi_driver(spi_slave_system_control_driver);
> +
> +MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
> +MODULE_DESCRIPTION("SPI slave handler controlling system state");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-spi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html



--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2017-05-22 20:00    [W:0.695 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site