lkml.org 
[lkml]   [2017]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 11/11] arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
Date
From: Srinath Mannam <srinath.mannam@broadcom.com>

The Stingray SoC has two instances of SDHCI controller
and one instance of iProc PWM.

Let's enable above mentioned devices in Stingray DT.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 39 ++++++++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 28 ++++++++++++++++
2 files changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index ff59a26..5dca7d1 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -43,6 +43,28 @@
serial2 = &uart2;
serial3 = &uart3;
};
+
+ sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
+ compatible = "regulator-gpio";
+ regulator-name = "sdio0_vddo_ctrl_reg";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pca9505 18 0>;
+ states = <3300000 0x0
+ 1800000 0x1>;
+ };
+
+ sdio1_vddo_ctrl_reg: sdio1_vddo_ctrl {
+ compatible = "regulator-gpio";
+ regulator-name = "sdio1_vddo_ctrl_reg";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pca9505 19 0>;
+ states = <3300000 0x0
+ 1800000 0x1>;
+ };
};

&memory { /* Default DRAM banks */
@@ -54,6 +76,10 @@
status = "okay";
};

+&pwm {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";

@@ -90,3 +116,16 @@
#size-cells = <1>;
};
};
+
+&sdio0 {
+ vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
+ non-removable;
+ full-pwr-cycle;
+ status = "okay";
+};
+
+&sdio1 {
+ vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
+ full-pwr-cycle;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 642d42c..44ed73c 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -269,6 +269,14 @@

#include "stingray-pinctrl.dtsi"

+ pwm: pwm@68910000{
+ compatible = "brcm,iproc-pwm";
+ reg = <0x00010000 0x1000>;
+ clocks = <&crmu_ref25m>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
i2c0: i2c@689b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000b0000 0x100>;
@@ -428,5 +436,25 @@
brcm,nand-has-wp;
status = "disabled";
};
+
+ sdio0: sdhci@68cf1000 {
+ compatible = "brcm,sdhci-iproc";
+ reg = <0x003f1000 0x100>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ clocks = <&sdio0_clk>;
+ iommus = <&smmu 0x6002 0x0000>;
+ status = "disabled";
+ };
+
+ sdio1: sdhci@68cf2000 {
+ compatible = "brcm,sdhci-iproc";
+ reg = <0x003f2000 0x100>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ clocks = <&sdio1_clk>;
+ iommus = <&smmu 0x6003 0x0000>;
+ status = "disabled";
+ };
};
};
--
2.7.4
\
 
 \ /
  Last update: 2017-05-22 14:01    [W:0.143 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site