lkml.org 
[lkml]   [2017]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [patch 2/2] MM: allow per-cpu vmstat_threshold and vmstat_worker configuration
On Tue, May 02, 2017 at 01:15:27PM -0400, Luiz Capitulino wrote:
> On Tue, 2 May 2017 13:52:00 -0300
> Marcelo Tosatti <mtosatti@redhat.com> wrote:
>
> > > I have several questions about the tunables:
> > >
> > > - What does the vmstat_threshold value mean? What are the implications
> > > of changing this value? What's the difference in choosing 1, 2, 3
> > > or 500?
> >
> > Its the maximum value for a vmstat statistics counter to hold. After
> > that value, the statistics are transferred to the global counter:
> >
> > void __mod_node_page_state(struct pglist_data *pgdat, enum node_stat_item item,
> > long delta)
> > {
> > struct per_cpu_nodestat __percpu *pcp = pgdat->per_cpu_nodestats;
> > s8 __percpu *p = pcp->vm_node_stat_diff + item;
> > long x;
> > long t;
> >
> > x = delta + __this_cpu_read(*p);
> >
> > t = __this_cpu_read(pcp->stat_threshold);
> >
> > if (unlikely(x > t || x < -t)) {
> > node_page_state_add(x, pgdat, item);
> > x = 0;
> > }
> > __this_cpu_write(*p, x);
> > }
> > EXPORT_SYMBOL(__mod_node_page_state);
> >
> > BTW, there is a bug there, should change that to:
> >
> > if (unlikely(x >= t || x <= -t)) {
> >
> > Increasing the threshold value does two things:
> > 1) It decreases the number of inter-processor accesses.
> > 2) It increases how much the global counters stay out of
> > sync relative to actual current values.
>
> OK, but I'm mostly concerned with the sysadmin who will have
> to change the tunable. So, I think it's a good idea to improve
> the doc to contain that information.

Yes, how is that:

Index: linux-2.6-git-disable-vmstat-worker/Documentation/vm/vmstat_thresholds.txt
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-git-disable-vmstat-worker/Documentation/vm/vmstat_thresholds.txt 2017-05-02 13:48:45.946840708 -0300
@@ -0,0 +1,78 @@
+Userspace configurable vmstat thresholds
+========================================
+
+This document describes the tunables to control
+per-CPU vmstat threshold and per-CPU vmstat worker
+thread.
+
+/sys/devices/system/cpu/cpuN/vmstat/vmstat_threshold:
+
+This file contains the per-CPU vmstat threshold.
+This value is the maximum that a single per-CPU vmstat statistic
+can accumulate before transferring to the global counters.
+
+A value of 0 indicates that the value is set
+by the in kernel algorithm.
+
+A value different than 0 indicates that particular
+value is used for vmstat_threshold.
+
+/sys/devices/system/cpu/cpuN/vmstat/vmstat_worker:
+
+Enable/disable the per-CPU vmstat worker.
+
+What does the vmstat_threshold value mean? What are the implications
+of changing this value? What's the difference in choosing 1, 2, 3
+or 500?
+====================================================================
+
+Its the maximum value for a vmstat statistics counter to hold. After
+that value, the statistics are transferred to the global counter:
+
+void __mod_node_page_state(struct pglist_data *pgdat, enum node_stat_item item,
+ long delta)
+{
+ struct per_cpu_nodestat __percpu *pcp = pgdat->per_cpu_nodestats;
+ s8 __percpu *p = pcp->vm_node_stat_diff + item;
+ long x;
+ long t;
+
+ x = delta + __this_cpu_read(*p);
+
+ t = __this_cpu_read(pcp->stat_threshold);
+
+ if (unlikely(x > t || x < -t)) {
+ node_page_state_add(x, pgdat, item);
+ x = 0;
+ }
+ __this_cpu_write(*p, x);
+}
+
+Increasing the threshold value does two things:
+ 1) It decreases the number of inter-processor accesses.
+ 2) It increases how much the global counters stay out of
+ sync relative to actual current values.
+
+
+Usage example:
+=============
+
+In a realtime system, the worker thread waking up and executing
+vmstat_update can be an undesired source of latencies.
+
+To avoid the worker thread from waking up, executing vmstat_update
+on cpu 1, for example, perform the following steps:
+
+
+cd /sys/devices/system/cpu/cpu0/vmstat/
+
+# Set vmstat threshold to 1 for cpu1, so that no
+# vmstat statistics are collected in cpu1's per-cpu
+# stats, instead they are immediately transferred
+# to the global counter.
+
+$ echo 1 > vmstat_threshold
+
+# Disable vmstat_update worker for cpu1:
+$ echo 0 > vmstat_worker
+

> > > - If the purpose of having vmstat_threshold is to allow disabling
> > > the vmstat kworker, why can't the kernel pick a value automatically?
> >
> > Because it might be acceptable for the user to accept a small
> > out of syncedness of the global counters in favour of performance
> > (one would have to analyze the situation).
> >
> > Setting vmstat_threshold == 1 means the global counter is always
> > in sync with the page counter state of the pCPU.
>
> IMHO, if vmstat_threshold == 1 is the required setting for
> disabling the vmstat kworker then I'd go with only one tunable
> for now. But that's just a suggestion.

I didnt want to force that on the user because allowing different
tunables covers more cases.

> > > - What are the implications of disabling the vmstat kworker? Will vm
> > > stats still be collected someway or will it be completely off for
> > > the CPU?
> >
> > It will not be necessary to collect vmstats because at every modification
> > of the vm statistics, pCPUs with vmstat_threshold=1 transfer their
> > values to the global counters (that is, there is no queueing of statistics
> > locally to improve performance).
>
> Ah, OK. Got this now. I'll give this patch a try. But I think we want
> to hear from Christoph (who worked on reducing the vmstat interruptions
> in the past).

Christoph?

> > > Also, shouldn't this patch be split into two?
> >
> > First add one sysfs file, then add another sysfs file, you mean?
>
> Yes, one tunable per patch.

Sure.

\
 
 \ /
  Last update: 2017-05-02 19:22    [W:0.089 / U:22.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site