lkml.org 
[lkml]   [2017]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] x86/mce/AMD: Carve out SMCA bank configuration
Date
From: Yazen Ghannam <yazen.ghannam@amd.com>

Scalable MCA systems have a new MCA_CONFIG register that we use to
configure each bank. We currently use this when we set up thresholding.
However, this is logically separate.

Group all SMCA-related initialization into a single function.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1493147772-2721-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/kernel/cpu/mcheck/mce_amd.c | 76 ++++++++++++++++++------------------
1 file changed, 38 insertions(+), 38 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index c511fa38ef4e..d00f299f2ada 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -164,17 +164,48 @@ static void default_deferred_error_interrupt(void)
}
void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt;

-static void get_smca_bank_info(unsigned int bank)
+static void smca_configure(unsigned int bank, unsigned int cpu)
{
- unsigned int i, hwid_mcatype, cpu = smp_processor_id();
+ unsigned int i, hwid_mcatype;
struct smca_hwid *s_hwid;
- u32 high, instance_id;
+ u32 high, low;
+ u32 smca_config = MSR_AMD64_SMCA_MCx_CONFIG(bank);
+
+ /* Set appropriate bits in MCA_CONFIG */
+ if (!rdmsr_safe(smca_config, &low, &high)) {
+ /*
+ * OS is required to set the MCAX bit to acknowledge that it is
+ * now using the new MSR ranges and new registers under each
+ * bank. It also means that the OS will configure deferred
+ * errors in the new MCx_CONFIG register. If the bit is not set,
+ * uncorrectable errors will cause a system panic.
+ *
+ * MCA_CONFIG[MCAX] is bit 32 (0 in the high portion of the MSR.)
+ */
+ high |= BIT(0);
+
+ /*
+ * SMCA sets the Deferred Error Interrupt type per bank.
+ *
+ * MCA_CONFIG[DeferredIntTypeSupported] is bit 5, and tells us
+ * if the DeferredIntType bit field is available.
+ *
+ * MCA_CONFIG[DeferredIntType] is bits [38:37] ([6:5] in the
+ * high portion of the MSR). OS should set this to 0x1 to enable
+ * APIC based interrupt. First, check that no interrupt has been
+ * set.
+ */
+ if ((low & BIT(5)) && !((high >> 5) & 0x3))
+ high |= BIT(5);
+
+ wrmsr(smca_config, low, high);
+ }

/* Collect bank_info using CPU 0 for now. */
if (cpu)
return;

- if (rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_IPID(bank), &instance_id, &high)) {
+ if (rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_IPID(bank), &low, &high)) {
pr_warn("Failed to read MCA_IPID for bank %d\n", bank);
return;
}
@@ -191,7 +222,7 @@ static void get_smca_bank_info(unsigned int bank)
smca_get_name(s_hwid->bank_type));

smca_banks[bank].hwid = s_hwid;
- smca_banks[bank].id = instance_id;
+ smca_banks[bank].id = low;
smca_banks[bank].sysfs_id = s_hwid->count++;
break;
}
@@ -433,7 +464,7 @@ prepare_threshold_block(unsigned int bank, unsigned int block, u32 addr,
int offset, u32 misc_high)
{
unsigned int cpu = smp_processor_id();
- u32 smca_low, smca_high, smca_addr;
+ u32 smca_low, smca_high;
struct threshold_block b;
int new;

@@ -457,37 +488,6 @@ prepare_threshold_block(unsigned int bank, unsigned int block, u32 addr,
goto set_offset;
}

- smca_addr = MSR_AMD64_SMCA_MCx_CONFIG(bank);
-
- if (!rdmsr_safe(smca_addr, &smca_low, &smca_high)) {
- /*
- * OS is required to set the MCAX bit to acknowledge that it is
- * now using the new MSR ranges and new registers under each
- * bank. It also means that the OS will configure deferred
- * errors in the new MCx_CONFIG register. If the bit is not set,
- * uncorrectable errors will cause a system panic.
- *
- * MCA_CONFIG[MCAX] is bit 32 (0 in the high portion of the MSR.)
- */
- smca_high |= BIT(0);
-
- /*
- * SMCA sets the Deferred Error Interrupt type per bank.
- *
- * MCA_CONFIG[DeferredIntTypeSupported] is bit 5, and tells us
- * if the DeferredIntType bit field is available.
- *
- * MCA_CONFIG[DeferredIntType] is bits [38:37] ([6:5] in the
- * high portion of the MSR). OS should set this to 0x1 to enable
- * APIC based interrupt. First, check that no interrupt has been
- * set.
- */
- if ((smca_low & BIT(5)) && !((smca_high >> 5) & 0x3))
- smca_high |= BIT(5);
-
- wrmsr(smca_addr, smca_low, smca_high);
- }
-
/* Gather LVT offset for thresholding: */
if (rdmsr_safe(MSR_CU_DEF_ERR, &smca_low, &smca_high))
goto out;
@@ -516,7 +516,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)

for (bank = 0; bank < mca_cfg.banks; ++bank) {
if (mce_flags.smca)
- get_smca_bank_info(bank);
+ smca_configure(bank, cpu);

for (block = 0; block < NR_BLOCKS; ++block) {
address = get_block_address(cpu, address, low, high, bank, block);
--
2.11.0
\
 
 \ /
  Last update: 2017-05-19 11:41    [W:0.075 / U:2.124 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site