lkml.org 
[lkml]   [2017]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 1/3] dt-bindings: Document STM32 I2S bindings
Date
Hello Rob,

Thanks for your comment.

On 05/13/2017 02:17 AM, Rob Herring wrote:
> On Thu, May 11, 2017 at 11:45:02AM +0200, olivier moysan wrote:
>> Add documentation of device tree bindings for STM32 SPI/I2S.
>>
>> Signed-off-by: olivier moysan <olivier.moysan@st.com>
>> ---
>> .../devicetree/bindings/sound/st,stm32-i2s.txt | 68 ++++++++++++++++++++++
>> 1 file changed, 68 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
>>
>> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
>> new file mode 100644
>> index 0000000..67b854a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
>> @@ -0,0 +1,68 @@
>> +STMicroelectronics STM32 SPI/I2S Controller
>> +
>> +The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
>> +Only some SPI instances support I2S.
>> +
>> +Required properties:
>> + - compatible: Must be "st,stm32h7-i2s"
>> + - reg: Offset and length of the device's register set.
>> + - interrupts: Must contain the interrupt line id.
>> + - clocks: Must contain phandle and clock specifier pairs for each entry
>> + in clock-names.
>> + - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
>> + "i2sclk": clock which feeds the internal clock generator
>> + "pclk": clock which feeds the peripheral bus interface
>> + "x8k": I2S parent clock for sampling rates multiple of 8kHz.
>> + "x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
>> + - dmas: DMA specifiers for tx and rx dma.
>> + See Documentation/devicetree/bindings/dma/stm32-dma.txt.
>> + - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
>> + - pinctrl-names: should contain only value "default"
>> + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
>> +
>> +Optional properties:
>> + - resets: Reference to a reset controller asserting the reset controller
>> +
>> +The device node should contain one 'port' child node with one child 'endpoint'
>> +node, according to the bindings defined in Documentation/devicetree/bindings/
>> +graph.txt.
>> +
>> +Example:
>> +sound_card {
>> + compatible = "audio-graph-card";
>> + dais = <&i2s2_port 0>;
>
> What is the 0 representing?
>

This is no more relevant, so to be removed.

>> +};
>> +
>> +i2s2: audio-controller@40003800 {
>> + compatible = "st,stm32h7-i2s";
>> + #sound-dai-cells = <0>;
>
> Should be dropped.
>

ok

>> + reg = <0x40003800 0x400>;
>> + interrupts = <36>;
>> + clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
>> + clock-names = "pclk", "i2sclk", "x8k", "x11k";
>> + dmas = <&dmamux2 2 39 0x400 0x1>,
>> + <&dmamux2 3 40 0x400 0x1>;
>> + dma-names = "rx", "tx";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2s2>;
>> +
>> + i2s2_port: port@0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
> This shouldn't even compile. You don't need these because because you
> have no reg property in the endpoint.
>
> You have a unit-address here w/o a reg property. You don't need a reg
> prop because you only have 1 port.
>

ok.

>> +
>> + cpu_endpoint: endpoint {
>> + remote-endpoint = <&codec_endpoint>;
>> + format = "i2s";
>> + bitclock-master = <&codec_endpoint>;
>> + frame-master = <&codec_endpoint>;
>> + };
>> + };
>> +};
>> +
>> +audio-codec {
>> + codec_port: port@0 {
>> + codec_endpoint: endpoint {
>> + remote-endpoint = <&cpu_endpoint>;
>> + };
>> + };
>> +};
>> --
>> 1.9.1
>>

BRs
Olivier

\
 
 \ /
  Last update: 2017-05-18 15:32    [W:0.070 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site