lkml.org 
[lkml]   [2017]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/2] PCI/portdrv: allocate MSI/MSIx vector for DPC RP service
Date
From: gabriele paoloni <gabriele.paoloni@huawei.com>

Currently the MSI/MSIx vectors for the root port services are
allocated calling pcie_init_service_irqs(). At the moment these
vectors are only allocated for AER, PME, HP.
This patch allocate an MSI/MSIx vector also for DPC.

Signed-off-by: Liudongdong <liudongdong3@huawei.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
drivers/pci/pcie/portdrv_core.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 4d16cf2..6a32b42 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -123,6 +123,31 @@ static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask)
nvec = max(nvec, entry + 1);
}

+ if (mask & PCIE_PORT_SERVICE_DPC) {
+ u16 reg16, pos;
+
+ /*
+ * The code below follows Section 6.2.10.1 of the PCI Express
+ * Base Specification 4.0 stating that bits 4-0 of DPC
+ * Capability Register contain a value indicating which of the
+ * MSI/MSI-X vectors assigned to the port is going to be used
+ * for DPC, where "For MSI-X, the value in this register
+ * indicates which MSI-X Table entry is used to generate the
+ * interrupt message." and "For MSI, the value in this field
+ * indicates the offset between the base Message Data and the
+ * interrupt message that is generated."
+ */
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC);
+ pci_read_config_word(dev, pos + PCI_EXP_DPC_CAP, &reg16);
+ entry = reg16 & 0x1f;
+ if (entry >= nr_entries)
+ goto out_free_irqs;
+
+ irqs[PCIE_PORT_SERVICE_DPC_SHIFT] = pci_irq_vector(dev, entry);
+
+ nvec = max(nvec, entry + 1);
+ }
+
/*
* If nvec is equal to the allocated number of entries, we can just use
* what we have. Otherwise, the port has some extra entries not for the
--
2.7.4

\
 
 \ /
  Last update: 2017-05-18 12:36    [W:0.801 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site