lkml.org 
[lkml]   [2017]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 20/31] eisa.txt: standardize document format
    Date
    Each text file under Documentation follows a different
    format. Some doesn't even have titles!

    Change its representation to follow the adopted standard,
    using ReST markups for it to be parseable by Sphinx:

    - use ReST notation for titles;
    - identify literal blocks;
    - use :Author: for document authorship;
    - use the proper notation for tables;
    - adjust whitespaces where needed.

    Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
    ---
    Documentation/eisa.txt | 260 +++++++++++++++++++++++++++----------------------
    1 file changed, 143 insertions(+), 117 deletions(-)

    diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
    index a55e4910924e..8e2c6e2b2a19 100644
    --- a/Documentation/eisa.txt
    +++ b/Documentation/eisa.txt
    @@ -1,4 +1,7 @@
    -EISA bus support (Marc Zyngier <maz@wild-wind.fr.eu.org>)
    +EISA bus support
    +================
    +
    +:Author: Marc Zyngier <maz@wild-wind.fr.eu.org>

    This document groups random notes about porting EISA drivers to the
    new EISA/sysfs API.
    @@ -14,168 +17,189 @@ detection code is generally also used to probe ISA cards). Moreover,
    most EISA drivers are among the oldest Linux drivers so, as you can
    imagine, some dust has settled here over the years.

    -The EISA infrastructure is made up of three parts :
    +The EISA infrastructure is made up of three parts:

    - The bus code implements most of the generic code. It is shared
    - among all the architectures that the EISA code runs on. It
    - implements bus probing (detecting EISA cards available on the bus),
    - allocates I/O resources, allows fancy naming through sysfs, and
    - offers interfaces for driver to register.
    + among all the architectures that the EISA code runs on. It
    + implements bus probing (detecting EISA cards available on the bus),
    + allocates I/O resources, allows fancy naming through sysfs, and
    + offers interfaces for driver to register.

    - The bus root driver implements the glue between the bus hardware
    - and the generic bus code. It is responsible for discovering the
    - device implementing the bus, and setting it up to be latter probed
    - by the bus code. This can go from something as simple as reserving
    - an I/O region on x86, to the rather more complex, like the hppa
    - EISA code. This is the part to implement in order to have EISA
    - running on an "new" platform.
    + and the generic bus code. It is responsible for discovering the
    + device implementing the bus, and setting it up to be latter probed
    + by the bus code. This can go from something as simple as reserving
    + an I/O region on x86, to the rather more complex, like the hppa
    + EISA code. This is the part to implement in order to have EISA
    + running on an "new" platform.

    - The driver offers the bus a list of devices that it manages, and
    - implements the necessary callbacks to probe and release devices
    - whenever told to.
    + implements the necessary callbacks to probe and release devices
    + whenever told to.

    Every function/structure below lives in <linux/eisa.h>, which depends
    heavily on <linux/device.h>.

    -** Bus root driver :
    +Bus root driver
    +===============

    -int eisa_root_register (struct eisa_root_device *root);
    +::
    +
    + int eisa_root_register (struct eisa_root_device *root);

    The eisa_root_register function is used to declare a device as the
    root of an EISA bus. The eisa_root_device structure holds a reference
    -to this device, as well as some parameters for probing purposes.
    +to this device, as well as some parameters for probing purposes::

    -struct eisa_root_device {
    - struct device *dev; /* Pointer to bridge device */
    - struct resource *res;
    - unsigned long bus_base_addr;
    - int slots; /* Max slot number */
    - int force_probe; /* Probe even when no slot 0 */
    - u64 dma_mask; /* from bridge device */
    - int bus_nr; /* Set by eisa_root_register */
    - struct resource eisa_root_res; /* ditto */
    -};
    + struct eisa_root_device {
    + struct device *dev; /* Pointer to bridge device */
    + struct resource *res;
    + unsigned long bus_base_addr;
    + int slots; /* Max slot number */
    + int force_probe; /* Probe even when no slot 0 */
    + u64 dma_mask; /* from bridge device */
    + int bus_nr; /* Set by eisa_root_register */
    + struct resource eisa_root_res; /* ditto */
    + };

    -node : used for eisa_root_register internal purpose
    -dev : pointer to the root device
    -res : root device I/O resource
    -bus_base_addr : slot 0 address on this bus
    -slots : max slot number to probe
    -force_probe : Probe even when slot 0 is empty (no EISA mainboard)
    -dma_mask : Default DMA mask. Usually the bridge device dma_mask.
    -bus_nr : unique bus id, set by eisa_root_register
    +============= ======================================================
    +node used for eisa_root_register internal purpose
    +dev pointer to the root device
    +res root device I/O resource
    +bus_base_addr slot 0 address on this bus
    +slots max slot number to probe
    +force_probe Probe even when slot 0 is empty (no EISA mainboard)
    +dma_mask Default DMA mask. Usually the bridge device dma_mask.
    +bus_nr unique bus id, set by eisa_root_register
    +============= ======================================================

    -** Driver :
    +Driver
    +======

    -int eisa_driver_register (struct eisa_driver *edrv);
    -void eisa_driver_unregister (struct eisa_driver *edrv);
    +::
    +
    + int eisa_driver_register (struct eisa_driver *edrv);
    + void eisa_driver_unregister (struct eisa_driver *edrv);

    Clear enough ?

    -struct eisa_device_id {
    - char sig[EISA_SIG_LEN];
    - unsigned long driver_data;
    -};
    -
    -struct eisa_driver {
    - const struct eisa_device_id *id_table;
    - struct device_driver driver;
    -};
    -
    -id_table : an array of NULL terminated EISA id strings,
    - followed by an empty string. Each string can
    - optionally be paired with a driver-dependent value
    - (driver_data).
    -
    -driver : a generic driver, such as described in
    - Documentation/driver-model/driver.txt. Only .name,
    - .probe and .remove members are mandatory.
    -
    -An example is the 3c59x driver :
    -
    -static struct eisa_device_id vortex_eisa_ids[] = {
    - { "TCM5920", EISA_3C592_OFFSET },
    - { "TCM5970", EISA_3C597_OFFSET },
    - { "" }
    -};
    -
    -static struct eisa_driver vortex_eisa_driver = {
    - .id_table = vortex_eisa_ids,
    - .driver = {
    - .name = "3c59x",
    - .probe = vortex_eisa_probe,
    - .remove = vortex_eisa_remove
    - }
    -};
    -
    -** Device :
    +::
    +
    + struct eisa_device_id {
    + char sig[EISA_SIG_LEN];
    + unsigned long driver_data;
    + };
    +
    + struct eisa_driver {
    + const struct eisa_device_id *id_table;
    + struct device_driver driver;
    + };
    +
    +=============== ====================================================
    +id_table an array of NULL terminated EISA id strings,
    + followed by an empty string. Each string can
    + optionally be paired with a driver-dependent value
    + (driver_data).
    +
    +driver a generic driver, such as described in
    + Documentation/driver-model/driver.txt. Only .name,
    + .probe and .remove members are mandatory.
    +=============== ====================================================
    +
    +An example is the 3c59x driver::
    +
    + static struct eisa_device_id vortex_eisa_ids[] = {
    + { "TCM5920", EISA_3C592_OFFSET },
    + { "TCM5970", EISA_3C597_OFFSET },
    + { "" }
    + };
    +
    + static struct eisa_driver vortex_eisa_driver = {
    + .id_table = vortex_eisa_ids,
    + .driver = {
    + .name = "3c59x",
    + .probe = vortex_eisa_probe,
    + .remove = vortex_eisa_remove
    + }
    + };
    +
    +Device
    +======

    The sysfs framework calls .probe and .remove functions upon device
    discovery and removal (note that the .remove function is only called
    when driver is built as a module).

    Both functions are passed a pointer to a 'struct device', which is
    -encapsulated in a 'struct eisa_device' described as follows :
    +encapsulated in a 'struct eisa_device' described as follows::

    -struct eisa_device {
    - struct eisa_device_id id;
    - int slot;
    - int state;
    - unsigned long base_addr;
    - struct resource res[EISA_MAX_RESOURCES];
    - u64 dma_mask;
    - struct device dev; /* generic device */
    -};
    + struct eisa_device {
    + struct eisa_device_id id;
    + int slot;
    + int state;
    + unsigned long base_addr;
    + struct resource res[EISA_MAX_RESOURCES];
    + u64 dma_mask;
    + struct device dev; /* generic device */
    + };

    -id : EISA id, as read from device. id.driver_data is set from the
    - matching driver EISA id.
    -slot : slot number which the device was detected on
    -state : set of flags indicating the state of the device. Current
    - flags are EISA_CONFIG_ENABLED and EISA_CONFIG_FORCED.
    -res : set of four 256 bytes I/O regions allocated to this device
    -dma_mask: DMA mask set from the parent device.
    -dev : generic device (see Documentation/driver-model/device.txt)
    +======== ============================================================
    +id EISA id, as read from device. id.driver_data is set from the
    + matching driver EISA id.
    +slot slot number which the device was detected on
    +state set of flags indicating the state of the device. Current
    + flags are EISA_CONFIG_ENABLED and EISA_CONFIG_FORCED.
    +res set of four 256 bytes I/O regions allocated to this device
    +dma_mask DMA mask set from the parent device.
    +dev generic device (see Documentation/driver-model/device.txt)
    +======== ============================================================

    You can get the 'struct eisa_device' from 'struct device' using the
    'to_eisa_device' macro.

    -** Misc stuff :
    +Misc stuff
    +==========

    -void eisa_set_drvdata (struct eisa_device *edev, void *data);
    +::
    +
    + void eisa_set_drvdata (struct eisa_device *edev, void *data);

    Stores data into the device's driver_data area.

    -void *eisa_get_drvdata (struct eisa_device *edev):
    +::
    +
    + void *eisa_get_drvdata (struct eisa_device *edev):

    Gets the pointer previously stored into the device's driver_data area.

    -int eisa_get_region_index (void *addr);
    +::
    +
    + int eisa_get_region_index (void *addr);

    Returns the region number (0 <= x < EISA_MAX_RESOURCES) of a given
    address.

    -** Kernel parameters :
    +Kernel parameters
    +=================

    -eisa_bus.enable_dev :
    +eisa_bus.enable_dev
    + A comma-separated list of slots to be enabled, even if the firmware
    + set the card as disabled. The driver must be able to properly
    + initialize the device in such conditions.

    -A comma-separated list of slots to be enabled, even if the firmware
    -set the card as disabled. The driver must be able to properly
    -initialize the device in such conditions.
    +eisa_bus.disable_dev
    + A comma-separated list of slots to be enabled, even if the firmware
    + set the card as enabled. The driver won't be called to handle this
    + device.

    -eisa_bus.disable_dev :
    +virtual_root.force_probe
    + Force the probing code to probe EISA slots even when it cannot find an
    + EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
    + (don't force), and set to 1 (force probing) when either
    + CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.

    -A comma-separated list of slots to be enabled, even if the firmware
    -set the card as enabled. The driver won't be called to handle this
    -device.
    -
    -virtual_root.force_probe :
    -
    -Force the probing code to probe EISA slots even when it cannot find an
    -EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
    -(don't force), and set to 1 (force probing) when either
    -CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
    -
    -** Random notes :
    +Random notes
    +============

    Converting an EISA driver to the new API mostly involves *deleting*
    code (since probing is now in the core EISA code). Unfortunately, most
    @@ -194,9 +218,11 @@ routine.
    For example, switching your favorite EISA SCSI card to the "hotplug"
    model is "the right thing"(tm).

    -** Thanks :
    +Thanks
    +======
    +
    +I'd like to thank the following people for their help:

    -I'd like to thank the following people for their help :
    - Xavier Benigni for lending me a wonderful Alpha Jensen,
    - James Bottomley, Jeff Garzik for getting this stuff into the kernel,
    - Andries Brouwer for contributing numerous EISA ids,
    --
    2.9.4
    \
     
     \ /
      Last update: 2017-05-19 03:44    [W:2.886 / U:1.200 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site