lkml.org 
[lkml]   [2017]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] net-next: stmmac: add adjust_link function
Date
My dwmac-sun8i serie will add some if (has_sun8i) to
stmmac_adjust_link()
Since the current stmmac_adjust_link() alreaady have lots of if (has_gmac/gmac4),
It is now better to create an adjust_link() function for each dwmac.

So this patch add an adjust_link() function pointer, and move code out
of stmmac_adjust_link to it.

Removing in the process stmmac_mac_flow_ctrl/stmmac_hw_fix_mac_speed
since there not used anymore.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 3 +
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 54 ++++++++++++++
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 46 ++++++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 54 ++++++++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 83 +---------------------
5 files changed, 158 insertions(+), 82 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index b7ce3fbb5375..451c231006fe 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -469,11 +469,14 @@ struct stmmac_dma_ops {
};

struct mac_device_info;
+struct stmmac_priv;

/* Helpers to program the MAC core */
struct stmmac_ops {
/* MAC core initialization */
void (*core_init)(struct mac_device_info *hw, int mtu);
+ /* adjust link */
+ int (*adjust_link)(struct stmmac_priv *priv);
/* Enable the MAC RX/TX */
void (*set_mac)(void __iomem *ioaddr, bool enable);
/* Enable and verify that the IPC module is supported */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index f3d9305e5f70..5f3aace46c41 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/ethtool.h>
#include <asm/io.h>
+#include "stmmac.h"
#include "stmmac_pcs.h"
#include "dwmac1000.h"

@@ -75,6 +76,58 @@ static void dwmac1000_core_init(struct mac_device_info *hw, int mtu)
#endif
}

+static int dwmac1000_adjust_link(struct stmmac_priv *priv)
+{
+ struct net_device *ndev = priv->dev;
+ struct phy_device *phydev = ndev->phydev;
+ int new_state = 0;
+ u32 tx_cnt = priv->plat->tx_queues_to_use;
+ u32 ctrl;
+
+ ctrl = readl(priv->ioaddr + GMAC_CONTROL);
+
+ if (phydev->duplex != priv->oldduplex) {
+ new_state = 1;
+ if (!(phydev->duplex))
+ ctrl &= ~GMAC_CONTROL_DM;
+ else
+ ctrl |= GMAC_CONTROL_DM;
+ priv->oldduplex = phydev->duplex;
+ }
+
+ if (phydev->pause)
+ priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, priv->flow_ctrl,
+ priv->pause, tx_cnt);
+
+ if (phydev->speed != priv->speed) {
+ new_state = 1;
+ switch (phydev->speed) {
+ case 1000:
+ ctrl &= ~GMAC_CONTROL_PS;
+ break;
+ case 100:
+ ctrl |= GMAC_CONTROL_PS;
+ ctrl |= GMAC_CONTROL_FES;
+ break;
+ case 10:
+ ctrl |= GMAC_CONTROL_PS;
+ ctrl |= ~GMAC_CONTROL_FES;
+ break;
+ default:
+ netif_warn(priv, link, priv->dev,
+ "broken speed: %d\n", phydev->speed);
+ phydev->speed = SPEED_UNKNOWN;
+ break;
+ }
+ if (phydev->speed != SPEED_UNKNOWN && likely(priv->plat->fix_mac_speed))
+ priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
+ priv->speed = phydev->speed;
+ }
+
+ writel(ctrl, priv->ioaddr + GMAC_CONTROL);
+ return new_state;
+}
+
static int dwmac1000_rx_ipc_enable(struct mac_device_info *hw)
{
void __iomem *ioaddr = hw->pcsr;
@@ -490,6 +543,7 @@ static void dwmac1000_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x,

static const struct stmmac_ops dwmac1000_ops = {
.core_init = dwmac1000_core_init,
+ .adjust_link = dwmac1000_adjust_link,
.set_mac = stmmac_set_mac,
.rx_ipc = dwmac1000_rx_ipc_enable,
.dump_regs = dwmac1000_dump_regs,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index 1b3609105484..ba3d46e65e1a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -27,6 +27,7 @@
#include <linux/crc32.h>
#include <asm/io.h>
#include "dwmac100.h"
+#include "stmmac.h"

static void dwmac100_core_init(struct mac_device_info *hw, int mtu)
{
@@ -40,6 +41,50 @@ static void dwmac100_core_init(struct mac_device_info *hw, int mtu)
#endif
}

+static int dwmac100_adjust_link(struct stmmac_priv *priv)
+{
+ struct net_device *ndev = priv->dev;
+ struct phy_device *phydev = ndev->phydev;
+ int new_state = 0;
+ u32 tx_cnt = priv->plat->tx_queues_to_use;
+ u32 ctrl;
+
+ ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
+ if (phydev->duplex != priv->oldduplex) {
+ new_state = 1;
+ if (!(phydev->duplex))
+ ctrl &= ~MAC_CONTROL_F;
+ else
+ ctrl |= MAC_CONTROL_F;
+ priv->oldduplex = phydev->duplex;
+ }
+
+ if (phydev->pause)
+ priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, priv->flow_ctrl,
+ priv->pause, tx_cnt);
+
+ if (phydev->speed != priv->speed) {
+ new_state = 1;
+ switch (phydev->speed) {
+ case 100:
+ case 10:
+ ctrl &= ~MAC_CONTROL_PS;
+ break;
+ default:
+ netif_warn(priv, link, priv->dev,
+ "broken speed: %d\n", phydev->speed);
+ phydev->speed = SPEED_UNKNOWN;
+ break;
+ }
+ if (phydev->speed != SPEED_UNKNOWN && likely(priv->plat->fix_mac_speed))
+ priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
+ priv->speed = phydev->speed;
+ }
+
+ writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
+ return new_state;
+}
+
static void dwmac100_dump_mac_regs(struct mac_device_info *hw, u32 *reg_space)
{
void __iomem *ioaddr = hw->pcsr;
@@ -150,6 +195,7 @@ static void dwmac100_pmt(struct mac_device_info *hw, unsigned long mode)

static const struct stmmac_ops dwmac100_ops = {
.core_init = dwmac100_core_init,
+ .adjust_link = dwmac100_adjust_link,
.set_mac = stmmac_set_mac,
.rx_ipc = dwmac100_rx_ipc_enable,
.dump_regs = dwmac100_dump_mac_regs,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 48793f2e9307..133b6bcd7b61 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include "stmmac_pcs.h"
#include "dwmac4.h"
+#include "stmmac.h"

static void dwmac4_core_init(struct mac_device_info *hw, int mtu)
{
@@ -59,6 +60,58 @@ static void dwmac4_core_init(struct mac_device_info *hw, int mtu)
writel(value, ioaddr + GMAC_INT_EN);
}

+static int dwmac4_adjust_link(struct stmmac_priv *priv)
+{
+ struct net_device *ndev = priv->dev;
+ struct phy_device *phydev = ndev->phydev;
+ int new_state = 0;
+ u32 tx_cnt = priv->plat->tx_queues_to_use;
+ u32 ctrl;
+
+ ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
+
+ if (phydev->duplex != priv->oldduplex) {
+ new_state = 1;
+ if (!(phydev->duplex))
+ ctrl &= ~GMAC_CONFIG_DM;
+ else
+ ctrl |= GMAC_CONFIG_DM;
+ priv->oldduplex = phydev->duplex;
+ }
+
+ if (phydev->pause)
+ priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, priv->flow_ctrl,
+ priv->pause, tx_cnt);
+
+ if (phydev->speed != priv->speed) {
+ new_state = 1;
+ switch (phydev->speed) {
+ case 1000:
+ ctrl &= ~GMAC_CONFIG_PS;
+ break;
+ case 100:
+ ctrl |= GMAC_CONFIG_PS;
+ ctrl |= GMAC_CONFIG_FES;
+ break;
+ case 10:
+ ctrl |= GMAC_CONFIG_PS;
+ ctrl |= ~GMAC_CONFIG_FES;
+ break;
+ default:
+ netif_warn(priv, link, priv->dev,
+ "broken speed: %d\n", phydev->speed);
+ phydev->speed = SPEED_UNKNOWN;
+ break;
+ }
+ if (phydev->speed != SPEED_UNKNOWN && likely(priv->plat->fix_mac_speed))
+ priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
+ priv->speed = phydev->speed;
+ }
+
+ writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
+ return new_state;
+}
+
static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
u8 mode, u32 queue)
{
@@ -669,6 +722,7 @@ static void dwmac4_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x,

static const struct stmmac_ops dwmac4_ops = {
.core_init = dwmac4_core_init,
+ .adjust_link = dwmac4_adjust_link,
.set_mac = stmmac_set_mac,
.rx_ipc = dwmac4_rx_ipc_enable,
.rx_queue_enable = dwmac4_rx_queue_enable,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b05a042cf2c6..fb3e2ddaa7c9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -286,21 +286,6 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue)
}

/**
- * stmmac_hw_fix_mac_speed - callback for speed selection
- * @priv: driver private structure
- * Description: on some platforms (e.g. ST), some HW system configuration
- * registers have to be set according to the link speed negotiated.
- */
-static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
-{
- struct net_device *ndev = priv->dev;
- struct phy_device *phydev = ndev->phydev;
-
- if (likely(priv->plat->fix_mac_speed))
- priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
-}
-
-/**
* stmmac_enable_eee_mode - check and enter in LPI mode
* @priv: driver private structure
* Description: this function is to verify and enter in LPI mode in case of
@@ -759,19 +744,6 @@ static void stmmac_release_ptp(struct stmmac_priv *priv)
}

/**
- * stmmac_mac_flow_ctrl - Configure flow control in all queues
- * @priv: driver private structure
- * Description: It is used for configuring the flow control in all queues
- */
-static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
-{
- u32 tx_cnt = priv->plat->tx_queues_to_use;
-
- priv->hw->mac->flow_ctrl(priv->hw, duplex, priv->flow_ctrl,
- priv->pause, tx_cnt);
-}
-
-/**
* stmmac_adjust_link - adjusts the link parameters
* @dev: net device structure
* Description: this is the helper called by the physical abstraction layer
@@ -793,60 +765,7 @@ static void stmmac_adjust_link(struct net_device *dev)
spin_lock_irqsave(&priv->lock, flags);

if (phydev->link) {
- u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
-
- /* Now we make sure that we can be in full duplex mode.
- * If not, we operate in half-duplex mode. */
- if (phydev->duplex != priv->oldduplex) {
- new_state = 1;
- if (!(phydev->duplex))
- ctrl &= ~priv->hw->link.duplex;
- else
- ctrl |= priv->hw->link.duplex;
- priv->oldduplex = phydev->duplex;
- }
- /* Flow Control operation */
- if (phydev->pause)
- stmmac_mac_flow_ctrl(priv, phydev->duplex);
-
- if (phydev->speed != priv->speed) {
- new_state = 1;
- switch (phydev->speed) {
- case 1000:
- if (priv->plat->has_gmac ||
- priv->plat->has_gmac4)
- ctrl &= ~priv->hw->link.port;
- break;
- case 100:
- if (priv->plat->has_gmac ||
- priv->plat->has_gmac4) {
- ctrl |= priv->hw->link.port;
- ctrl |= priv->hw->link.speed;
- } else {
- ctrl &= ~priv->hw->link.port;
- }
- break;
- case 10:
- if (priv->plat->has_gmac ||
- priv->plat->has_gmac4) {
- ctrl |= priv->hw->link.port;
- ctrl &= ~(priv->hw->link.speed);
- } else {
- ctrl &= ~priv->hw->link.port;
- }
- break;
- default:
- netif_warn(priv, link, priv->dev,
- "broken speed: %d\n", phydev->speed);
- phydev->speed = SPEED_UNKNOWN;
- break;
- }
- if (phydev->speed != SPEED_UNKNOWN)
- stmmac_hw_fix_mac_speed(priv);
- priv->speed = phydev->speed;
- }
-
- writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
+ new_state = priv->hw->mac->adjust_link(priv);

if (!priv->oldlink) {
new_state = 1;
--
2.13.0
\
 
 \ /
  Last update: 2017-05-15 13:43    [W:0.061 / U:1.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site