lkml.org 
[lkml]   [2017]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2] ARM: dts: bcm283x: Reserve first page for firmware
From
Date
Am 09.05.2017 um 11:04 schrieb Phil Elwell:
> The Raspberry Pi startup stub files for multi-core BCM27XX processors

Curiously, while this V2 was rebased to apply against the bcm283x rather
than bcm2710 file, it changed the text from BCM283X to BCM27XX.

> make the secondary CPUs spin until the corresponding mailbox is
> written. These stubs are loaded at physical address 0x00000xxx (as seen
> by the ARMs), but this page will be reused by the kernel unless it is
> explicitly reserved, causing the waiting cores to execute random code.
>
> Use the /memreserve/ Device Tree directive to mark the first page as
> off-limits to the kernel.
>
> See: https://github.com/raspberrypi/linux/issues/1989
>
> Signed-off-by: Phil Elwell <phil@raspberrypi.org>
> ---
>
> Changes in V2:
> - Rebase against linux-next
> - Drop downstream-only patch
>
> arch/arm/boot/dts/bcm283x.dtsi | 2 ++
> 1 file changed, 2 insertions(+)

Regards,
Andreas

--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)

\
 
 \ /
  Last update: 2017-05-14 14:50    [W:0.087 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site