lkml.org 
[lkml]   [2017]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] gpu: drm: gma500: remove dead code
On Tue, May 09, 2017 at 10:22:21AM -0500, Gustavo A. R. Silva wrote:
> Local variable use_gct is assigned to a constant value and it is never
> updated again. Remove this variable and the dead code it guards.
>
> Addresses-Coverity-ID: 145690
> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>

Looks reasonable, applied to drm-misc for 4.13.

Thanks, Daniel

> ---
> drivers/gpu/drm/gma500/mdfld_tpo_vid.c | 51 ++++++----------------------------
> 1 file changed, 9 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/gma500/mdfld_tpo_vid.c b/drivers/gpu/drm/gma500/mdfld_tpo_vid.c
> index d8d4170..d40628e 100644
> --- a/drivers/gpu/drm/gma500/mdfld_tpo_vid.c
> +++ b/drivers/gpu/drm/gma500/mdfld_tpo_vid.c
> @@ -32,53 +32,20 @@ static struct drm_display_mode *tpo_vid_get_config_mode(struct drm_device *dev)
> struct drm_display_mode *mode;
> struct drm_psb_private *dev_priv = dev->dev_private;
> struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD;
> - bool use_gct = false;
>
> mode = kzalloc(sizeof(*mode), GFP_KERNEL);
> if (!mode)
> return NULL;
>
> - if (use_gct) {
> - mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
> - mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
> - mode->hsync_start = mode->hdisplay +
> - ((ti->hsync_offset_hi << 8) |
> - ti->hsync_offset_lo);
> - mode->hsync_end = mode->hsync_start +
> - ((ti->hsync_pulse_width_hi << 8) |
> - ti->hsync_pulse_width_lo);
> - mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) |
> - ti->hblank_lo);
> - mode->vsync_start =
> - mode->vdisplay + ((ti->vsync_offset_hi << 8) |
> - ti->vsync_offset_lo);
> - mode->vsync_end =
> - mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) |
> - ti->vsync_pulse_width_lo);
> - mode->vtotal = mode->vdisplay +
> - ((ti->vblank_hi << 8) | ti->vblank_lo);
> - mode->clock = ti->pixel_clock * 10;
> -
> - dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay);
> - dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay);
> - dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start);
> - dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end);
> - dev_dbg(dev->dev, "htotal is %d\n", mode->htotal);
> - dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start);
> - dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end);
> - dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal);
> - dev_dbg(dev->dev, "clock is %d\n", mode->clock);
> - } else {
> - mode->hdisplay = 864;
> - mode->vdisplay = 480;
> - mode->hsync_start = 873;
> - mode->hsync_end = 876;
> - mode->htotal = 887;
> - mode->vsync_start = 487;
> - mode->vsync_end = 490;
> - mode->vtotal = 499;
> - mode->clock = 33264;
> - }
> + mode->hdisplay = 864;
> + mode->vdisplay = 480;
> + mode->hsync_start = 873;
> + mode->hsync_end = 876;
> + mode->htotal = 887;
> + mode->vsync_start = 487;
> + mode->vsync_end = 490;
> + mode->vtotal = 499;
> + mode->clock = 33264;
>
> drm_mode_set_name(mode);
> drm_mode_set_crtcinfo(mode, 0);
> --
> 2.5.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

\
 
 \ /
  Last update: 2017-05-10 21:21    [W:0.122 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site